| Standard + edition | The designation and edition the tender actually names. | The designation and edition the mill can certify. | The specification page carrying both, plus the mill's written statement. | Where the two differ, who is authorised to accept the difference for this project? |
|---|
| Grade | Grade as the project specification writes it. | Grade as the offer states it. | Grade callout on both documents and on the mill certificate. | Has the grade on offer been accepted for this project, in writing, by the responsible party? |
|---|
| Diameter | Nominal diameters in the bar schedule. | Diameters the offer covers. | Size schedule against the governing standard's tolerance basis. | Are any sizes on the schedule outside the range the offer actually covers? |
|---|
| Length | Bar length the cutting and bending schedule assumes. | Length the offer is made on, transport limits considered. | Stated length with its tolerance basis agreed in writing. | Does the offered length still fit the schedule and the transport the consignment will use? |
|---|
| Quantity + mass basis | Tonnage or piece count, and whether the mass is theoretical or actual. | Quantity basis the offer is calculated on. | Written basis for the arithmetic; weighbridge or mill mass where that is the agreed basis. | Which mass basis governs — theoretical, weighbridge or mill mass — and who confirms it? |
|---|
| Marking | Marking and identification the project expects. | Marking the mill applies by default. | Marking detail, and how bundle identity survives the movement. | Is the marking requirement stated anywhere, or is it assumed to be the default? |
|---|
| Mill certificate / test records | The evidence set the project's quality function accepts. | The certificate scope the supplier can issue. | Certificate scope stated explicitly, including what it excludes. | Has the buyer confirmed the certificate scope is acceptable, before goods-in rather than at it? |
|---|
| Inspection | Any inspection requirement the project imposes. | Whether the supplier can accommodate it. | Named method, hold points, witness arrangements and timing. | Who nominates the inspector, and at what point in a multi-leg movement can they actually attend? |
|---|
| Documents | Documents the destination's import process expects. | Documents the supplier issues as standard. | Document list confirmed for the actual consignment. | Which documents sit with the importer rather than the supplier on this page? |
|---|
| Destination | Destination country and the named receiving point. | Route the offer is quoted on. | Named place written the same way on both sides. | Is the named place precise enough for two offers to be compared against each other? |
|---|