West Africa · Nigeria

Flag of Nigeria

Steel Rebar Supply from UAE to Nigeria

Request a bulk or project rebar quotation for Nigeria; specify the bar, quantity, destination and FOB, CFR or CIF basis. Material may be offered for export from the UAE, Dubai or Jebel Ali only after availability and terms for the specific lot are confirmed.

No stock, price, lead time, certification or shipment-history claim is made on this page. The flag identifies the destination market and does not imply a local office in Nigeria.

WhatsApp Us
Export basis
Enquiries placed as export supply from the UAE, subject to lot confirmation.
Quote basis
FOB at a named UAE port, or CFR / CIF at a named Nigerian port.
Known gate
Whether this exact shipment falls under the current SONCAP route is confirmed before quotation.

What to send with the RFQ

These seven inputs are what turn a general enquiry into a quotation that can actually be prepared. Anything still open is carried forward as an open question.

  • Standard with editionNot just the grade name
  • Full diameter scheduleEvery size on the drawings
  • Grade as writtenQuoted exactly from the BOQ
  • Quantity in MTWith the mass basis it is ordered on
  • Destination portPlus the inland city or site if applicable
  • IncotermFOB, CFR or CIF with the place named
  • Documents and inspectionAnd who signs off on the evidence

Product

What can you request — rebar specification fields

This page covers steel rebar and reinforcing bar for concrete — commonly searched as deformed bar, and locally as iron rod. Those are search terms, not a stock list: the precise steel specification governs the quotation. No diameter range, grade list or tonnage is published here because none has been confirmed against this page.

  1. 01

    Product / form

    Steel rebar — deformed / ribbed reinforcing bar for concrete. Plain round bar where the schedule calls for it.

    Tell us whether the schedule specifies deformed bar, plain round, or a mix, and whether “iron rod” is being used as a local search term for the same product.

  2. 02

    Standard and edition

    BS 4449, BS EN 10080, ASTM A615, IS 1786 or the project's own specification — the edition is part of the requirement, not an afterthought.

    State the standard and the year or edition the project accepts. A grade name alone does not identify a bar.

  3. 03

    Grade

    Whatever grade the structural drawings and BOQ specify.

    Enter the grade exactly as written on the drawings. Do not ask this page to convert one grade naming convention into another — that decision belongs to your engineer.

  4. 04

    Diameter

    The full schedule of diameters on the project.

    List every diameter required, not just the dominant one. A mix of sizes changes the bundle plan and the mass basis.

  5. 05

    Length

    Standard mill lengths or cut-to-length where the project allows it.

    State the length and whether cutting is permitted. Transport and handling both depend on it.

  6. 06

    Quantity and unit

    Requested in metric tons unless the tender says otherwise.

    Give the quantity in MT and say whether it is a single shipment or a phased schedule.

  7. 07

    Tolerance and mass basis

    The basis the quantity is ordered, weighed and paid on.

    Confirm whether the tonnage is theoretical mass, weighbridge mass or mill mass. This is the single most common source of a post-arrival dispute.

  8. 08

    Marking and bundle ID

    Bar marking and bundle identification the project will accept.

    State the marking convention and what has to be legible on arrival at the receiving point.

  9. 09

    Required evidence

    The document set the importer or engineer will accept as proof.

    List the documents, the inspection hold point and who signs off. Evidence named after dispatch is a delay, not a safeguard.

Rebar product specifications
Nigeria rebar requirement versus evidence: decision, buyer requirement, evidence to attach and open question
DecisionBuyer requirementEvidenceOpen question
Product / formDeformed bar, plain round, or the mix the schedule specifies.Bar schedule or BOQ line item.Is “iron rod” in your enquiry the same product as the rebar on the drawings?
Standard and editionNamed standard with its year or edition.Tender or specification clause.Does the project accept the edition the mill works to, or a later one?
GradeGrade exactly as written on the structural drawings.Drawing callout or BOQ.Who signs off if the offered grade naming differs from the drawing convention?
Diameter and lengthFull schedule of diameters and lengths.Bar bending schedule.Is cutting permitted, and does the receiving point accept standard mill lengths?
Quantity and mass basisTonnage in MT on a stated mass basis.Weighbridge or mill ticket at the stated basis.Theoretical, weighbridge or mill mass — which governs payment?
Marking and bundle IDMarking convention the receiving point will accept.Bundle tag and packing list.What has to remain legible after discharge and inland movement?
Mill certificate and test recordsCertificate scope covering the delivered lot.Mill test certificate with heat or lot traceability.Does the certificate have to be issued to the importer by name?
InspectionWhether an independent hold point applies.Inspection release or witness report.At which stage is inspection triggered — before loading or before dispatch?
DocumentsDocument set the importer will lodge.Invoice, packing list, origin documentation as applicable.Which documents does the clearing agent need before arrival, not after?
Destination and IncotermNamed destination port and any inland receiving point.Commercial terms naming the exact places.FOB at a named UAE port, or CFR/CIF at a named Nigerian port?

No grade is converted and no standard is treated as equivalent to another. Where an offered convention differs from the drawing convention, that difference is put back to you rather than silently resolved.

Supply Origin

Export supply from the UAE — and the three different statements inside it

“Available for export from the UAE,” “held as stock in Dubai,” and “manufactured in the UAE” are three separate commercial claims, and a buyer in Lagos is right to treat them as different. Only the first describes what this page offers. The other two are confirmed, or not, against your specific lot — they are not asserted here.

What this page is

Exported from the UAE

Your enquiry is placed with a UAE-based steel trading company, and the export location and load point are confirmed against the lot offered.

Needs verification

Dubai rebar stock

A stock position is a claim about what is physically held. No ready-stock statement is published here because none has been verified for the material offered.

Needs verification

UAE-manufactured

Mill origin is a fact about production, not about where the enquiry is placed. Where your project requires it, ask — the applicable mill is confirmed in the quotation.

What the RFQ asks about origin and load point

The RFQ records the shipment basis you are asking about rather than assuming it. Where a load point attaches to the Incoterm you select, it is captured as a named place — because “FOB UAE” is not a quotation basis, and neither is “CIF Nigeria.”

  • FOB — the named UAE load port is captured explicitly in the form.
  • CFR or CIF — the named Nigerian destination port is captured explicitly in the form.
  • Onward inland movement — recorded separately from the discharge port, because they are different scopes.
  • Any mill-origin requirement your project places on the material is stated in the enquiry, not assumed.

No Jebel Ali loading is implied or guaranteed for every enquiry. Where a confirmed export or load point applies to your lot, it is stated in the quotation — not on this page.

Commercial boundary

Held by the exporter
The offered specification, the packing and marking, the documents the mill issues, and loading at the named export point.
Held by the importer
The import route, the conformity step that applies to the exact product, clearance at the destination port, and any duty or levy.
Shared, and worth naming early
The evidence set. Which documents the importer will accept, and who signs off, decides whether a discharge becomes a handover or an argument.

Nigeria-side steps belong to the importer and their agent. This page does not present itself as the authority, the certifier or a customs broker on this route.

Delivery Quotation

Can delivery to Nigeria be quoted?

Yes as a request — and the request is only answerable once the destination and the term are named. A quote to a discharge port and a quote to a site in the interior are different scopes, priced differently, and owned by different parties at different points in the journey.

Nigeria rebar delivery quotation: what each term names, what it covers and what to state in the RFQ
TermNamesCoversWhat to state in the RFQ
FOBOne named UAE load portDelivery to the vessel at the named port. Sea freight and everything after it sit outside the term.The UAE load port you want priced against.
CFRA named UAE port and a named Nigerian portFreight to the named destination port. Insurance and onward inland movement sit outside the term.The destination port, and separately any inland point.
CIFA named UAE port and a named Nigerian portFreight and marine insurance to the named destination port. Inland movement still sits outside it.The destination port, the cargo value basis, and the inland point if separately required.
Inland deliveryThe named inland city or siteA separate scope from any discharge-port term — quoted as its own leg, never folded into CFR or CIF.The site address, the receiving point and who unloads.

FOB

Names
One named UAE load port
Covers
Delivery to the vessel at the named port. Sea freight and everything after it sit outside the term.
What to state in the RFQ
The UAE load port you want priced against.

CFR

Names
A named UAE port and a named Nigerian port
Covers
Freight to the named destination port. Insurance and onward inland movement sit outside the term.
What to state in the RFQ
The destination port, and separately any inland point.

CIF

Names
A named UAE port and a named Nigerian port
Covers
Freight and marine insurance to the named destination port. Inland movement still sits outside it.
What to state in the RFQ
The destination port, the cargo value basis, and the inland point if separately required.

Inland delivery

Names
The named inland city or site
Covers
A separate scope from any discharge-port term — quoted as its own leg, never folded into CFR or CIF.
What to state in the RFQ
The site address, the receiving point and who unloads.

No sailing schedule, transit time, freight rate or served-port claim is made here. The commercially feasible terms are the ones returned in your quotation, and only for the ports and places named in it.

Document and inspection check before an ocean-bound steel rebar consignment is released
Document handoff

The term decides who owns the journey

FOB ends at the vessel. CFR and CIF carry you to a named port. Inland movement is a third leg again. Naming the place is what makes the three comparable.

Price

What it will cost — and why no figure appears on this page

No per-MT price is published here, because a rebar price is a function of inputs this page does not hold. What is published is the exact set of inputs a quotation needs, and a route to request it.

A rebar quotation is prepared against seven inputs

  • Diameter and length schedule — every size on the drawings.
  • Grade, exactly as the BOQ or structural drawings write it.
  • Standard with its edition or year.
  • Quantity in MT, with the mass basis it is ordered on.
  • Actual origin and availability for the specific lot.
  • Named loading and destination points for the Incoterm requested.
  • Freight, inspection and document requirements for the shipment.

Change any one of the seven and the price changes. That is why the honest answer to “what does it cost?” is a quotation rather than a number on this page.

Price per MT

Ask for a per-metric-ton quotation against the specification you have entered.

FOB, CFR or CIF

Choose the term you need, and name the places that attach to it.

Project schedule

Describe a phased call-off or list the BOQ line items in the message field.

No indicative price, discount, offer or price table is published on this page. Any figure you see quoted elsewhere should be treated as indicative only until it is issued against your own specification and your own named places.

Price request

Request Current Rebar Price for Nigeria

The RFQ captures the specification, the quantity in MT, the named destination and the Incoterm in one pass. Enter them once and the price request is complete.

A quotation is issued once feasibility and the evidence scope are confirmed for the lot. No response time is promised on this page.

Standards, Quality & Documents

Nigeria SONCAP scope and traceability gate

Nigeria applies its own conformity route to regulated imports. This page does not assert that any rebar order is covered by it, and it does not issue a compliance badge. What it does is hold the five questions that must be answered before a PO is released, out in the open.

5 of 5 gates still unresolved. Until they are settled, the outcome for a specific shipment remains open — which is the point of listing them here rather than assuming one.
Structural reinforcement placement being checked against a project specification on site
Receiving check

The gate closes at the port, not in the drawings

A specification that is correct on paper is only half the requirement. The lot that arrives has to carry the identity the certificate describes.

Evidence you can request

Each item below can be requested in the RFQ. Availability is confirmed subject to the offered lot — none is claimed on this page as already held.

  • Mill test certificate
  • Heat / lot traceability record
  • Packing list with bundle identification
  • Commercial invoice
  • Certificate of origin
  • Export documentation
  • Third-party inspection report
  • Test results (yield / tensile / elongation)

Official source — verification lead

SON — SONCAP service

The SON source describes SONCAP as pre-shipment verification for regulated imports against applicable Nigerian Industrial Standards (NIS) or approved equivalents, with product, CoC and SONCAP documentation sitting inside the conformity workflow.

Limits: This is a verification gate, not proof that any particular rebar order is covered or certified. It establishes the route and the vocabulary — not the status of your shipment, and not a legal opinion.

Method: Open the official source directly on or after the information date; identify the page, catalogue or service that speaks to this exact product, the current edition and the importer or project scope; then cross-check the buyer's tender and, where the source leaves scope uncertain, confirm with the importer or the responsible authority.

Information date:

How to Order

Six steps from enquiry to quotation

The sequence matters more than the speed. Almost every dispute on a rebar consignment traces back to one of these steps being left implicit at the enquiry stage.

  1. 01

    Send the RFQ

    Company, work email, phone or WhatsApp. The specification fields are the substance of the enquiry — the contact fields are how the answer reaches you.

  2. 02

    State size, grade and standard

    Standard with edition, grade, and the full diameter and length schedule. If the drawing names a grade convention, quote it exactly as written.

  3. 03

    Give the quantity in MT

    Tonnage and the mass basis it is ordered on, plus whether the requirement is one shipment or a phased schedule.

  4. 04

    Name the port and final destination

    The Nigerian destination port and, if applicable, the inland city or site. A discharge-port quote and a site-delivery quote are different scopes.

  5. 05

    Request FOB, CFR or CIF

    Each term is tied to a named place. Add the documents and inspection hold point the importer needs, and say who verifies what.

  6. 06

    Receive a quotation once confirmed

    The quotation follows once the lot, the named places, the evidence scope and the commercial terms are all confirmed. No response time is promised here.

RFQ

Request rebar quote for Nigeria

Complete the specification and commercial fields below. Anything you cannot answer yet can be left open — it is carried into the request as a question rather than filled in on your behalf.

Specification

Quantity

Destination and terms

Suggested port names are for convenience only. Naming one does not imply this company serves it, quotes to it or can deliver there — feasibility is confirmed in the quotation.
Required Incoterm *

Documents and inspection

Documents / inspection requested
Requested items are confirmed subject to the offered lot. Selecting one does not mean this page asserts it is available.

Contact

Your details are used to answer this enquiry. Tracking parameters from the link you arrived by are attached to the request where consent allows, and are never displayed on the page.

WhatsApp Us

The summary is built only from what you have entered. No value is filled in on your behalf, and no response time is promised.

Contact

Contact the commercial department

Three direct routes to the same team that prepares the quotation. The RFQ form above reaches the same place; these are for buyers who would rather talk first.

Working hours

Monday – Saturday: 8.00 AM – 6.00 PM · Sunday: Closed. Enquiries received outside these hours are answered on the next working day.

Office 3303, Churchill Executive Tower, Business Bay, Dubai, United Arab Emirates.

Bundle marking and identification on a steel rebar consignment at a receiving checkpoint
Bundle marking

A bundle ID only works if it survives the journey

Marking agreed at the enquiry stage is what connects the certificate in your hand to the steel on the ground at the receiving point. Where the tag and the record part company, the evidence stops describing the delivery.

What reaches the commercial department

  • The full specification as you entered it, including anything left open.
  • The destination port and any inland point, named exactly.
  • The Incoterm with the places attached to it.
  • The document and inspection requests, recorded against the enquiry.
  • The project or tender reference you supplied, if any.

Submitting the form sends nothing until the request completes. If it fails, your entries are preserved and the page tells you plainly rather than showing a success state.

Buyer Questions

Nigeria rebar enquiries — what buyers ask

Short, conditional answers. Where a fact depends on your specification, your lot or your importer's arrangement, the answer says so rather than resolving it for you.

Can you supply rebar to Nigeria?

Send an RFQ describing the bar, the quantity in MT, the destination port or inland point and the Incoterm basis. Whether a specific lot can be offered for a specific shipment is confirmed against the enquiry — this page does not assert availability, and no stock position is published here.

Can I request CFR or CIF pricing?

Yes — ask for CFR or CIF against a named Nigerian destination port. Each term is quoted with its exact place named, not as a country-wide promise, and freight feasibility is confirmed before an offer is issued.

What sizes, grades and standards are available?

Enter the full diameter and length schedule, the grade as written on the drawings, and the standard with its edition. The offered specification is matched against your requirement in the quotation rather than listed as a stock range on this page.

Can I order bulk or project quantities?

Give the tonnage in MT and say whether it is a single shipment or a phased schedule. Capacity for the specific lot is confirmed in the quotation — nothing on this page promises a quantity.

Can you provide MTC or third-party inspection?

Request the certificate scope, the traceability record and any inspection hold point in the RFQ. Each is confirmed subject to the offered lot; none is claimed as already available, and no inspection service is asserted on this page.

How do I request a price per ton?

Send the diameter and length schedule, the grade, the quantity in MT, the named destination port and the Incoterm basis. A per-MT quotation is prepared against those inputs — no price is published on this page because the inputs decide it.

Can I buy from Dubai or the UAE for Nigeria?

Enquiries are placed as export supply from the UAE, and the RFQ records the location and load point that apply to your specific lot. Material exported from the UAE, material held as Dubai stock, and material manufactured in the UAE are three different commercial statements — the applicable one is confirmed in the quotation, not assumed here.

What do you need for a quote?

Standard with edition, grade, diameters, lengths, quantity in MT with its mass basis, destination port or inland point, Incoterm, required date, and the documents and inspection the importer needs. Anything still open is carried into the RFQ as an open question rather than filled in on your behalf.

Which Nigeria port can you quote?

Name your nominated destination port — Lagos (Apapa, Tin Can Island or Lekki), Onne, Port Harcourt, Calabar, Warri or another — and freight feasibility is confirmed in the quotation. This page does not assert a served port, a sailing schedule or a route.

Ready to send a Nigeria rebar RFQ?

Enter the specification, quantity, destination and Incoterm once, and the request is complete.