Flag of Tanzania

Destination · Tanzania

Steel Rebar Supply from UAE to Tanzania

Request a bulk or project rebar quotation for Tanzania; specify the bar, quantity, destination and FOB, CFR or CIF basis.

UAE / Dubai / Jebel Ali export supply may be offered only after availability and terms are confirmed for your enquiry. Nothing on this page is a stock position or a guaranteed loading.

Export region
UAE / Dubai / Jebel Ali
Destination
Tanzania — buyer-nominated port
Quote basis
FOB · CFR · CIF

Specification-led enquiry — no price is issued until availability, route and evidence scope are confirmed

What this page sets up

  • The rebar specification and size schedule
  • The standard the buyer requires, and its edition
  • Whether the origin is an export point, stock or a UAE mill
  • The product evidence due before loading, separately from the commercial fields

Whether this product falls under current TBS conformity procedures is a question for your importer. This page keeps it visible rather than answering it on their behalf.

Product · Available Rebar

What can a Tanzania buyer actually request?

This page covers steel rebar — reinforcing bar for concrete, which most enquiries specify in its deformed form. Local terminology varies, and that difference is worth settling early.

Deformed bar, and why the wording matters

Enquiries into Tanzania frequently use iron rod for what the drawings and the mill certificate call reinforcement bar. The two terms are used interchangeably in everyday trade and are not interchangeable in a purchase order. The precise steel specification — form, standard, edition, grade, dimensions and tolerance basis — governs the quotation. State the schedule rather than the everyday term and the offer can be written against it.

Deformed bar is the form most often specified for roads and infrastructure works. More on the form itself is set out under deformed steel rebar.

No diameter, grade, standard, length or tonnage is published on this page as available. Those values are confirmed against the offered lot. If they are open, the RFQ below carries them forward as questions rather than filling them in with a guessed range.

Specify these in your RFQ

Diameters
State the schedule
List every nominal size on the drawing or bar schedule. This page does not publish a size range.
Grades
State the designation
Use the grade the design assumes. No grade conversion is applied or assumed.
Standards and editions
Name the edition
Name the standard the buyer requires — TZS, EAS or project-specific — and its edition year.
Lengths
Random / stock / cut
State whether random, stock or cut-to-length, and the cut length if it applies.
Minimum / project tonnage
State the MT quantity
Give the tonnage or piece count and the basis it is measured on.
Bundling / packing
State the packing basis
State bundle size, tagging and any handling constraint at the receiving point.

Requirement versus offer

Each row separates what the buyer states from what the quotation is then obliged to confirm. Two offers cannot be compared unless both are written on the same basis.

Rebar requirement versus offer: the aspect, what the buyer states, and what the supplier confirms in the quotation
AspectWhat the buyer statesWhat the offer confirms
Product / formReinforcing bar — most enquiries arrive as deformed bar. "Iron rod" is common local terminology and is read as rebar unless the enquiry states otherwise.Confirmed as the exact form offered for the lot, stated in the quotation.
Standard / editionName the standard — TZS, EAS or project-specific — and the edition year the buyer requires.Stated for the offered lot. No equivalence to another standard is assumed.
GradeThe designation on the drawings — not a nearest equivalent.Stated for the offered lot. Grade interchangeability is not offered as a default.
Diameter / lengthThe full size and length schedule, item by item.Matched against the schedule in the offer, with anything unavailable flagged as a question.
Tolerance / mass basisName the basis the delivered quantity will be measured against.Stated explicitly so the invoiced mass and the received mass are on the same footing.
QuantityMetric tonnes, with the theoretical or actual basis stated.Quoted against that basis; the offer is not silent on which one applies.
Marking / bundle IDWhat the project and the receiving point expect to see on the bar and the bundle tag.Confirmed for the lot before dispatch, not after arrival.
Required evidenceThe certificate and inspection scope the project will accept at goods-in.Confirmed as available or not available for that lot — subject to confirmation with the offered lot.

Scroll the table sideways to see every column.

Pre-shipment inspection records being checked against tag traceability on reinforcement bar.
Pre-shipment

Evidence due before loading is a different deadline

Some evidence has to exist before the consignment is loaded; some can follow the shipment. Knowing which applies to your order decides whether the schedule is achievable — and it belongs in the enquiry.

Editorial illustration of an industry practice. It does not depict Noor Deira Steel material, records or facilities.

UAE · Dubai · Jebel Ali Supply

Where the material comes from is three different answers.

Export point, stock location and mill origin are separate commercial facts. Buyers who conflate them end up comparing offers that were never equivalent to begin with.

Exported from the UAE

Means: The commercial origin of the transaction is a UAE loading point.

Does not mean: It does not by itself state where the steel was rolled.

Given as Dubai stock

Means: Material is physically held at a named Dubai location at the time of the offer.

Does not mean: It is not a statement of stock depth, size range or tonnage.

Stated as UAE-manufactured

Means: The rolling mill origin is genuinely and verifiably in the UAE.

Does not mean: It is not implied by the export point. The two are separate facts.

This page does not state that material is currently available for export from UAE / Jebel Ali, does not claim Dubai rebar stock, and does not claim UAE manufacturing origin. Each is confirmed against your enquiry and stated in the offer when it applies. Loading from a particular UAE port is not guaranteed for every enquiry.

Three questions to settle early

  1. 01Where is it rolling from?The mill origin, stated, not inferred from the loading port.
  2. 02Where is it sitting today?Whether the lot is drawn from UAE stock or arranged to the order.
  3. 03Where does it load?The named UAE loading point the FOB offer is written against.

The RFQ below asks for this directly. It is the part of the enquiry most often left implicit, and the part that most often changes the answer.

Supply to Tanzania · Logistics

Can delivery be quoted? Give the quote a place to land.

A named loading point and a named destination are what turn a shipment intention into a comparable price. Neither can be quoted from a country name alone.

Five inputs the RFQ needs

Destination port
Name the Tanzanian port you will clear through — or state if a different discharge point applies. No port is assumed for you.
Final city or site
State the inland city, town or project site. Discharge port and final delivery point are different obligations.
Incoterm
Ask for FOB at a named UAE port, or CFR / CIF at a named Tanzanian destination port.
Required date
State the date the material is needed at the destination, and whether the schedule is firm.
Importer-side handoff
State who clears, who receives at port, and which documents the consignee needs against the shipment.

Discharge-port quotation and delivery to a site are different obligations. If you need the material at an inland point, say so — it is priced and confirmed separately, not folded silently into a port rate.

Incoterms, plainly

Each term is defined against the named place in your offer. Three letters on their own do not define anything.

FOBFree On Board

Covers: The material is placed on board the vessel you nominate at the named UAE loading port.

Excludes: Sea freight, discharge, destination clearance and onward inland movement.

CFRCost and Freight

Covers: Freight to the named destination port is included in the price for the basis quoted.

Excludes: Marine insurance, discharge handling and inland delivery beyond the named port.

CIFCost, Insurance and Freight

Covers: Freight plus marine insurance of the agreed scope to the named destination port.

Excludes: Import clearance, duty, discharge handling and inland movement unless separately quoted.

No port, sailing schedule, route, freight charge or inland delivery service is assumed or published here. All of it is confirmed as part of the quote.

Tanzania shipment basis: the decision, what the buyer must name in the RFQ, and what is confirmed in the quotation
DecisionWhat the buyer namesWhat the quote confirms
Loading basisFOB at a named UAE port, or EXW if you arrange collectionThe loading point the offer is written against
Destination basisCFR or CIF at your named Tanzanian portFreight feasibility and the freight-inclusive price
Discharge pointThe Tanzanian port you will clear throughThat port as the named place in the offer
Onward movementThe inland city, town or project siteWhether onward delivery can be quoted, as a separate line
TimingThe date the material is neededWhether that date is achievable for the lot
Importer handoffWho clears and who receives at portThe document set issued against the consignment
Cargo-planning desk with the destination field being completed on shipping paperwork.
Destination basis

The named place makes the offer comparable

The port or delivery point and the trade rule that applies to it are what turn a shipment plan into a comparison basis. An offer that names neither is only half a basis.

Editorial illustration of an industry practice. It does not depict Noor Deira Steel operations, a booked route or a confirmed sailing.

Price · Quotation

What will it cost?

Plainly: no fixed price per MT is available on this page, and none is invented here. The current quote depends on your specification and your commercial basis.

What the per-MT figure depends on

01Diameter and grade

The size and mechanical class schedule directly change what is being priced.

02Standard and edition

The governing standard sets the chemistry, mechanical class and marking convention.

03Quantity in MT

Tonnage changes the commercial basis, and the theoretical or actual basis has to match.

04Actual origin and availability

Where the lot is drawn from, at the time of the enquiry, is part of the price.

05Named loading and destination points

A bare country promise is not priceable. Named places are.

06Incoterm and freight

FOB, CFR and CIF are three different commercial offers, not three labels for one.

07Pre-shipment evidence timing

Evidence due before loading affects the schedule, and therefore the basis.

08Document requirements

Certificates, origin documents and conformity evidence are part of the offer scope.

An indicative or “from” price is not shown because it would be a number you could not transact. A price per MT is issued once the specification, the tonnage, the named places and the Incoterm are on the table.

Submit a project schedule or BOQ

If your requirement is a full bar schedule, a tender BOQ or a multi-line package, send it through the RFQ rather than summarising it. A schedule carries the size, grade, length and quantity detail that a paragraph cannot, and it is what the quotation is actually written against.

Email the schedule

What you can ask to be priced

  • Price per MTAgainst your stated diameter, grade, standard and tonnage.
  • FOB, named UAE portA loading-point basis you control the freight on.
  • CFR, named Tanzania portFreight-inclusive to the port you nominate.
  • CIF, named Tanzania portFreight and agreed marine insurance to that port.
  • Optional scopeInspection, testing and document items, priced as their own lines.

Only commercially feasible options are presented in the eventual offer. If a basis cannot be supported for your lot, it is said plainly rather than quoted anyway.

Standards · Quality · Documents

TBS Product-Scope & Pre-Shipment Gate

Two things decide the evidence plan: which product category you are buying and under what standard, and whether your importer has confirmed the current conformity treatment. The gate keeps product evidence due before loading separate from the commercial and destination fields.

Product-scope gate

0 of 5 items known

5 items still open. Where the product category, the required standard or the conformity treatment is unconfirmed, the evidence plan cannot be set — and evidence timing decides whether the schedule holds.

Product evidence

Category, standard, grade, dimensions, marking and the certificate scope. These are settled before loading.

Commercial / destination

Port, Incoterm, quantity basis and required date. These follow the evidence plan, and are not part of it.

This page does not state that reinforcement bar falls under any particular TBS conformity procedure, and it does not cite a specific standard or edition as the current requirement for your order. Both are questions for your importer, carried into the RFQ as open items rather than answered here.

Who confirms what

Regulatory and conformity scope for the exact product and shipment is confirmed by the importer and the project engineer. The supplier states what the offered lot carries. This page does neither on their behalf.

  • Importer

    Whether this product category is under current TBS conformity procedures, and which pathway applies to the consignment.

  • Importer / project engineer

    The standard, edition and acceptance scope for the exact product, and the evidence required.

  • Supplier

    The specification, marking, test evidence and document scope actually available for the offered lot.

Primary source

Referenced as a verification lead only. Open it directly and confirm the current product scope, standard edition and import procedure yourself — the bureau’s site describes its functions generally, and that is not a statement that rebar is covered, nor certification or clearance for your shipment.

Document and inspection matrix

What can be asked for, what it applies to, and who confirms it. Nothing in this table is a statement that any item is currently available.

Tanzania document and inspection matrix: the document item, the scope it covers, and who confirms it
Document / inspection itemScope it coversConfirmed by
Mill test certificate / mill test recordsCertificate scope and test evidence for the offered lot.Requested by the buyer; confirmed against the offered lot.Subject to confirmation with the offered lot
Specification statementThe standard, edition, grade and dimensional basis the lot is supplied against.Requested by the buyer; confirmed in the offer.Subject to confirmation with the offered lot
Packing listBundle count, packing form and the mass basis used.Requested by the buyer; issued with the consignment.Subject to confirmation with the offered lot
Commercial invoiceValue, Incoterm and the named places the offer is built on.Requested by the buyer; issued by the supplier.Subject to confirmation with the offered lot
Origin documentationWhere applicable to the destination's import requirements.Requested by the buyer; confirmed for the lot before dispatch.Subject to confirmation with the offered lot
Export documentsThe documents required to move the consignment out of the loading point.Requested by the buyer; confirmed for the shipment.Subject to confirmation with the offered lot
Conformity / pre-shipment evidenceWhatever the importer's confirmed conformity treatment requires, and at what point.Importer confirms the requirement; supplier confirms what the lot carries.Subject to confirmation with the offered lot
Third-party inspectionScope, method and timing, if the project requires a witnessed inspection.Nominated by the buyer; accommodated against the lot if feasible.Subject to confirmation with the offered lot
Reinforcement bar in place at an infrastructure concrete pour.
Infrastructure pour

Evidence timing decides the pour date

On infrastructure works the pour is scheduled around the steel being on site and accepted. Evidence that had to exist before loading is what makes that date achievable — not something to settle after arrival.

Editorial illustration of an industry practice. It does not depict a Noor Deira Steel project, client or site.

This is an RFQ and document-planning checklist, not legal, customs or regulatory advice. The importer or project engineer confirms whether the exact product category falls under current TBS conformity treatment, which procedure applies, and what evidence is due before loading, for that consignment.

No third-party inspection service is offered or implied by this page. Inspection scope is requested by the buyer and confirmed against the offered lot during quotation. Noor Deira Steel is not the standards authority, the certifier, the customs broker or a local stockist, and this page does not claim any of those roles.

How to Order

Six steps from enquiry to quotation

Short, and in order. Each step produces something the next one needs, which is why the sequence matters more than the speed.

  1. 01

    Send the RFQ

    Start the enquiry with the buyer details and the commercial basis you want quoted.

  2. 02

    Specify size, grade and standard / edition

    The designation on the drawings, with the edition year the buyer requires.

  3. 03

    Give the quantity in MT

    Tonnes, with the theoretical or actual basis stated.

  4. 04

    Name the port and final destination

    The discharge port and the inland city or site you need the material at.

  5. 05

    Request FOB / CFR / CIF with a named place and any document or inspection needs

    A named place is what makes the offer comparable to another offer.

  6. 06

    Receive the quotation once feasibility and evidence are confirmed

    No price is issued before availability, route and the evidence scope are checked.

No response-time promise is made here. The quotation is issued once feasibility and evidence are confirmed.

Request Rebar Quote

Send a qualified Tanzania rebar RFQ

This collects a comparable specification and route. It does not return a price, a stock position or a delivery promise — a person reviews the enquiry and responds on the basis you state.

Buyer details
Rebar specification
Tanzania destination & commercial basis
Documents & inspection
Documents / inspection requested *
Each item requested here is confirmed against the offered lot in the quotation — requesting one is not a statement that it is already available.

Submissions reach our quotation desk. The full enquiry route is also available at /rfq on this same domain. No price, stock or lead time is returned automatically.

RFQ summary

This is exactly what your enquiry currently contains. Anything still open stays visibly open rather than being guessed at.

Buyer
NameNot provided
CompanyNot provided
CountryTanzania
Work emailNot provided
Phone / WhatsAppNot provided
Rebar Specification
Product / bar formDeformed reinforcing bar
Diameter and lengthNot provided
Grade / standard / editionNot provided
QuantityNot provided
Destination & Commercial Basis
Destination port or inland city / siteNot provided
Required IncotermNot provided
Named FOB load portNot provided
Named CFR / CIF discharge portNot provided
Onward delivery locationNot provided
Required delivery dateNot provided
Documents & Inspection
Documents / inspection requestedNot provided
Project / tender referenceNot provided
Message / additional specificationsNot provided
TBS Product Scope & Pre-Shipment
Bar categoryNot provided
Buyer-required TZS / EAS / project standardNot provided
Current TBS conformity treatment confirmed?Not provided
Product evidence due before loadingNot provided
Commercial / destination fieldsNot provided

The copy includes only what you have entered. If you would rather raise the enquiry directly, send it to sales@noordeirasteel.ae.

Contact options

Reach the commercial department directly

Three direct routes, plus the RFQ above. The form remains the fastest way to get a comparable enquiry in front of a reviewer — the direct channels are for questions the form cannot carry.

WhatsApp Us

Registered office: Office 3303, Churchill Executive Tower, Business Bay, Dubai, United Arab Emirates. No Tanzania office or local stock position is claimed anywhere on this page. Material is offered for export from the UAE only once availability and terms are confirmed for the specific lot.

WhatsApp is shown against the published commercial mobile number. Confirm the number is still monitored for export enquiries before release.

Working hours are stated in Gulf Standard Time (UTC+4), which is one hour behind Tanzania. A message sent late in the Tanzanian day reaches the desk the following morning.

FAQ

Questions buyers in Tanzania ask before an RFQ

Short answers, in the condition they actually hold. Where a question can only be settled by your specification or your importer, the answer says so.

Can you supply rebar to Tanzania?
The route exists as an RFQ for UAE export supply. Whether any specific size, grade or tonnage can be offered for your Tanzania shipment depends on the lot and the route, so it is confirmed against your enquiry rather than promised on this page.
Can I request CFR or CIF pricing?
Yes — name the Tanzanian destination port and the enquiry can ask for CFR or CIF against that named place. The quote is issued only if the freight and route are feasible at the time.
What sizes, grades and standards are available?
No size, grade or standard is published here as in stock or available. State what your project requires and it is confirmed against the offered lot.
Can I order bulk / project quantities?
Bulk and project tonnages are quoted on enquiry. State the MT quantity and whether it is measured on a theoretical or actual basis, and availability at that tonnage is confirmed against the offered lot.
Can you provide MTC or third-party inspection?
Both can be requested. Each is confirmed for the offered lot — subject to confirmation with that lot — rather than assumed available at the time of the enquiry.
How do I request a price per ton?
Give the size, grade, MT quantity, a named destination and the Incoterm you want quoted. Those five inputs are what make a per-MT figure meaningful.
Can I buy from Dubai / UAE for Tanzania?
Export supply can be arranged from the UAE. That is separate from where the steel was manufactured — the export location and the mill origin are two different facts, and both are stated explicitly when relevant.
What do you need for a quote?
The technical fields — form, standard, edition, grade, sizes, lengths — and the commercial fields — quantity, destination, Incoterm, required date and any document or inspection scope.
Which Tanzania port can you quote?
Name the destination port you nominate and freight feasibility is confirmed in the quote. The enquiry should state the port you actually intend to clear through — this page does not assume one for you.