Flag of ZimbabweExport supply · UAE to Zimbabwe

Steel Rebar Supply from UAE to Zimbabwe

Request a bulk or project rebar quotation for Zimbabwe; specify the bar, quantity, destination and FOB, CFR or CIF basis.

Material may be offered for export from UAE / Dubai / Jebel Ali only after availability and terms are confirmed. Nothing on this page is a statement that a particular size, grade, quantity or document is currently in stock or currently offerable.

Free to submit. No price, stock position or lead time is returned automatically — a reviewer responds on the basis you state.

What this page is quoted on

Product
Steel rebar / reinforcing bar, quoted per specification
Export location
UAE — dispatched through a UAE port on confirmation
Destination
Zimbabwe, served as an inland destination
Quote basis
FOB named UAE port · CFR / CIF named seaport
Price
Price on request — no per-MT figure is published here
Evidence
Requested upfront, confirmed against the offered lot

The flag identifies the destination market. No Zimbabwe office, branch or local stock position is claimed.

Product

What can the buyer request?

This page sells steel rebar — reinforcing bar — for export against a specification. Deformed bar is quoted where the requirement calls for it. The quotation is written against the exact bar you specify, not against a product description on a page.

“Iron rod” and how the quote is actually written

Local terminology varies, and an enquiry written as “iron rod” or “reinforcement rod” is understood as an enquiry for steel rebar. What governs the quotation is the precise steel specification, not the trade name — because two enquiries using the same local term can describe entirely different bars. Give us the diameter, grade and standard, and the terminology stops being a source of ambiguity.

We do not publish a standing list of available sizes and grades, because what can be offered changes with the lot, the origin and the time of enquiry. Instead, you state the requirement and we confirm what can be supplied against it.

Specify these on the RFQ; we confirm against the offer

None of the following is filled in on this page. They are the fields your enquiry has to carry, and they are checked against the offered lot rather than assumed from it.

Diameters
List every bar size your schedule calls for. A schedule range is not a substitute for the sizes on it.
Stated by the buyer on the RFQ
Grades
The grade designation the structural design specifies, exactly as the drawing or project standard writes it.
Stated by the buyer on the RFQ
Standards and editions
The standard and its edition year. An edition is part of the specification, not a detail to settle later.
Stated by the buyer on the RFQ
Lengths
Stock length or cut length, and whether the order is straight bar, coiled, or cut and bent.
Stated by the buyer on the RFQ
Minimum / project tonnage
The tonnage you need, and whether it is actual or theoretical mass. Project quantities are quoted per enquiry.
Stated by the buyer on the RFQ
Bundling and packing
Bundle configuration, tag format and how the mark must reconcile to the certificate for your receiving check.
Stated by the buyer on the RFQ
Bundled steel reinforcement bars aligned in a storage area, tagged ready for dispatch.

Editorial illustration of an industry practice. It does not depict Noor Deira Steel stock, a Noor Deira Steel facility, or a certificate belonging to this business.

No automatic grade conversion

Where a project specifies a grade under one system and an offer is available under a comparable one, the equivalence is not assumed. Any substitution is put to you explicitly, with the basis stated, for your engineer to accept or reject.

Requirement versus offer

The left column is what your enquiry must carry. The right column is what the quotation does with it. The gap between them is where most rebar disputes originate, so it is set out rather than glossed over.

Zimbabwe rebar requirement versus offer matrix: the item, what the buyer states, and how the offer treats it
ItemWhat the buyer statesHow the offer treats it
Product / bar formDeformed bar, plain round, coil, or cut and bent.Confirmed against the offered lot, not assumed from the enquiry wording.
Standard / editionThe designation and edition year the project requires.Withdrawn or superseded editions are not silently substituted.
GradeAs written on the structural drawing.No automatic grade conversion between systems.
Diameter / lengthEvery size on the schedule, with lengths.Quoted per size; mixed-size lots are priced as such.
Tolerance / mass basisState whether actual or theoretical mass governs.The mass basis used is declared in the offer.
Quantity in MTTotal tonnage, and whether partial bundles are acceptable.Availability at the stated tonnage is confirmed, not implied.
Marking / bundle IDHow bundles must be tagged for your receiving reconciliation.Marking convention confirmed for the lot before loading.
Required evidenceWhat must exist before dispatch, and who accepts it.Each document item confirmed as its own line in the offer.

Export location

Where is export supply arranged?

Three phrases that sound interchangeable on an enquiry form and are not. Separating them is the difference between a quotation you can rely on and one that collapses at the loading point.

Material exported from UAE

Goods consolidated and dispatched through a UAE port under an export sale. This is the commercial basis this page is written for.

Availability for a specific lot is confirmed on enquiry, never assumed from the destination alone.

Material located as Dubai stock

Goods physically held in Dubai warehouses at the time of enquiry, potentially shorter lead time than a fresh consolidation.

A stock position is only stated where one has been verified for the size, grade and quantity in question.

Material manufactured in UAE

Goods produced by a UAE mill, which is a statement about production origin rather than about where the goods currently sit.

Mill origin is only claimed where proven for the offered lot. It is not inferred from the loading port.

Loading point is confirmed, not assumed

Jebel Ali is a major UAE port and a common loading point for export consignments, but this page does not state that every enquiry loads there. The port a consignment actually loads from is a commercial decision taken against the lot, the vessel and the terms — and it is confirmed in the quotation rather than promised in advance.

For an FOB quotation the loading port has to be named to be a complete term. If you need the offer written against a specific UAE port, say so in the RFQ and the quotation is issued on that basis.

No confirmed export or load point is published on this page, because naming one before it is verified for your enquiry would misrepresent what is guaranteed. It is established during the quotation.

Origin / stock / dispatch clarification

The RFQ carries this as an explicit question rather than leaving it to inference. Tell us which of the three you are buying, and the offer is written to match.

  • Export from UAEGoods dispatched through a UAE port under an export sale.
  • Dubai stockGoods physically held in Dubai at the time of enquiry.
  • UAE-manufacturedGoods produced by a UAE mill, stated only where proven.

Supply to Zimbabwe

Can delivery be quoted?

Zimbabwe is landlocked. The sea leg ends at a coastal port and everything beyond that point is a separate movement with its own responsibility, cost and risk. Getting that boundary right at enquiry stage is what makes the quotation usable.

There is no “CIF Zimbabwe.” CIF and CFR are seaport terms, and Zimbabwe has no seaport. They are written against a named coastal port. An inland delivered price is a different agreement, naming the receiving place and the term, and it is quoted separately.

What the RFQ has to establish

Six things. None of them can be assumed on your behalf, because each one changes who is responsible when something goes wrong.

01
Named overseas discharge port
Zimbabwe is landlocked, so the sea leg ends at a coastal port and the inland movement is a separate matter. Name the port you will clear through.
02
Inland receiving city or site
The final point the material has to reach. This is what an inland quote is written against, and it has to be a named place.
03
Who handles each leg
Who arranges the sea freight, who clears the port, and who moves the cargo inland. Each leg is quoted against a named responsible party.
04
Incoterm and its named place
FOB needs a UAE port. CFR and CIF need a named seaport. An inland delivered term needs a named inland place and a separately agreed term.
05
Required date at the receiving point
The date the material is needed at the site, not the date it leaves the UAE. Transit and clearance sit between those two dates.
06
Import review expectations
Any conformity, permit or inspection obligation your importer carries, identified up front so it is not discovered at the border.

Terms, and the place each one needs

  • FOBNamed UAE port

    The sea leg ends at a port you have named. FOB needs a named UAE loading point to be a complete term.

  • CFRNamed seaport

    Freight is included to the seaport you name. It does not extend to an inland city, and it is not written as “CFR Zimbabwe”.

  • CIFNamed seaport

    Freight plus the agreed marine insurance cover to the seaport you name. The same naming requirement applies.

  • Inland deliveredNamed inland place

    A separate agreement naming the receiving point, the term and the responsibility split. Quoted only where it is commercially feasible.

No route is promised

This page does not state a transit route, a corridor, a schedule or a fixed delivery time. It does not claim a guaranteed UAE-to-Zimbabwe service. Shipping feasibility and routing are checked against the actual consignment before any offer is issued, and where a basis cannot be supported it is said plainly rather than quoted anyway.

A logistics coordinator directing cargo movement at a port, planning a multi-leg delivery.
Separated handoffs

Every leg has an owner

Where the sea leg ends and the inland movement begins is the point most often left unstated. Naming it before the quotation is what keeps a delivery date achievable rather than aspirational.

Editorial illustration of an industry practice. It does not depict a Noor Deira Steel shipment, client or route.

Price

What will it cost?

Plainly: no fixed price per MT is available on this page, and none is invented here. The current quote depends on your specification and your commercial basis.

What the per-MT figure depends on

01Specification

Diameter, grade and the standard edition. A tighter or less common specification moves the price more than tonnage does.

02Quantity

Tonnage and whether it divides evenly into standard bundles. Small or fragmented lots carry a different cost base.

03Origin and availability

Where the material actually comes from for this lot, which is a commercial fact confirmed on enquiry rather than a constant.

04Named loading and discharge points

The UAE port it loads from and the seaport it lands at. Both are part of the price, and both have to be named.

05Incoterm

FOB, CFR or CIF, and whether an inland leg is included. Each step in the chain is a separate cost line.

06Inland movement

For a landlocked destination this is the leg most likely to move the number, and the one most often left unstated.

07Inspection and documents

Third-party inspection, additional testing and document scope are priced as their own lines, not absorbed silently.

An indicative or “from” price is not shown because it would be a number you could not transact. A price per MT is issued once the specification, the tonnage, the named places and the Incoterm are on the table.

Submit a project schedule or BOQ

If your requirement is a full bar schedule, a tender BOQ or a multi-line package, send it through the RFQ rather than summarising it. A schedule carries the size, grade, length and quantity detail that a paragraph cannot, and it is what the quotation is actually written against.

Email the schedule

What you can ask to be priced

  • Price per MTAgainst your stated diameter, grade, standard and tonnage.
  • FOB, named UAE portA loading-point basis you control the freight on.
  • CFR, named seaportFreight-inclusive to the coastal port you nominate.
  • CIF, named seaportFreight and agreed marine insurance to that port.
  • Inland deliveredSeparately agreed, against a named inland place and term.
  • Optional scopeInspection, testing and document items, priced as their own lines.

Only commercially feasible options are presented in the eventual offer. If a basis cannot be supported for your lot, it is said plainly rather than quoted anyway.

Standards, quality & documents

How is the specification checked?

Cross-border traceability and receiving reconciliation. For a landlocked destination the evidence chain has to survive more handoffs than it does on a direct sea route, so the lot, the bundle and the certificate are reconciled deliberately rather than assumed to line up.

Traceability & receiving gate

0 of 5 items known

Work through these before sending. They are not a form submission — they are the reconciliation you will need to be able to make when the material arrives.

Open items are not a problem — they are the reason the RFQ exists. Everything still unanswered here is carried into the enquiry as a question rather than resolved on this page.

This page does not state that rebar is subject to any mandatory Zimbabwean conformity obligation, and it does not assert a border or clearance pathway. Those are questions for your importer, carried into the RFQ as open items.

Who confirms what

Regulatory and conformity scope for the exact product and shipment is confirmed by the importer and the project engineer. The supplier states what the offered lot carries. This page does neither on their behalf.

  • Importer

    Whether any conformity obligation applies to this consignment, and what the border requires.

  • Importer / project engineer

    The standard, edition and acceptance scope for the exact product, and the evidence required.

  • Supplier

    The specification, marking, test evidence and document scope actually available for the offered lot.

Primary source

Standards Association of Zimbabwe

Verified reachable at build time: the site states it is “an Organization for Standardization” and that it “develop[s] and publish[es] standards,” with a work programme covering construction among other sectors, and lists a consignment-based conformity assessment service.

The link below is a verification lead, not a compliance statement. SAZ describes itself as an organization that develops and publishes standards and lists a consignment-based conformity assessment service — but none of that shows whether rebar is currently subject to a mandatory conformity obligation for your shipment, or what that obligation would require. Import clearance, border handling and any compulsory conformity duty are separately verified importer questions.

Lot, bundle and certificate reconciliation

What can be asked for, what it covers, and who confirms it. Nothing in this table is a statement that any item is currently available.

Zimbabwe document and inspection reconciliation matrix: the document item, the scope it covers, and who confirms it
Document / inspection itemScope it coversConfirmed by
MTC / mill test recordsHeat-level chemical and mechanical results for the steel supplied.Requested by the buyer; confirmed for the lot before dispatch.Subject to confirmation with the offered lot
Specification statementThe standard and grade the material is supplied against.Requested by the buyer; confirmed against the offered lot.Subject to confirmation with the offered lot
Packing listBundle count, marks and the weights per bundle.Confirmed by the supplier for the shipment loaded.Subject to confirmation with the offered lot
Commercial invoiceThe commercial basis of the sale and the stated Incoterm.Issued by the supplier against the agreed terms.Subject to confirmation with the offered lot
Origin documentationWhere applicable to the destination's import requirements.Requested by the buyer; confirmed for the lot before dispatch.Subject to confirmation with the offered lot
Export documentsThe documents required to move the consignment out of the loading point.Requested by the buyer; confirmed for the shipment.Subject to confirmation with the offered lot
Third-party inspectionInspection scope you nominate, and at what point in the chain it applies.Requested by the buyer; confirmed for the offered lot.Subject to confirmation with the offered lot
Reinforcement bar in place at a commercial concrete pour.
Received for the pour

On commercial concrete works the pour is scheduled around the steel being on site and accepted. Evidence that had to exist before dispatch is what makes that date achievable — not something to settle after the material has crossed a border.

Editorial illustration of an industry practice. It does not depict a Noor Deira Steel project, client or site.

How to order

Six steps, in order

Short, and sequential. Each step produces something the next one needs, which is why the order matters more than the speed.

  1. 1

    Send the RFQ

    Put the requirement in the form so it arrives with a specification attached, rather than as a request to be followed up.

  2. 2

    Specify size, grade and standard

    Diameter and length, grade, and the standard with its edition year. This is what the quotation is written against.

  3. 3

    Give the quantity in MT

    State the tonnage and whether actual or theoretical mass governs, so the mass basis is agreed before it matters.

  4. 4

    Name the port and final destination

    The seaport you clear through, and the inland point the material has to reach. Both need to be named places.

  5. 5

    Request FOB, CFR or CIF

    With the named place and the document or inspection scope you need attached to the request.

  6. 6

    Receive the quotation

    Issued once feasibility and the evidence plan are confirmed. Only options that can actually be supported are quoted.

No response time is promised on this page. Enquiries are reviewed by the commercial desk on the basis you state, and the completeness of your specification is what determines how quickly a usable answer comes back.

Request Rebar Quote

Send a qualified Zimbabwe rebar RFQ

This collects a comparable specification and route. It does not return a price, a stock position or a delivery promise — a person reviews the enquiry and responds on the basis you state.

Buyer details
Rebar specification
Route & commercial basis

Zimbabwe is landlocked. Name the seaport you will clear through and the inland point the material has to reach. CFR and CIF are quoted to the seaport; the inland leg is a separate matter.

Documents & inspection
Documents / inspection requested *
Each item requested here is confirmed against the offered lot in the quotation — requesting one is not a statement that it is already available.

Submissions reach our quotation desk. The full enquiry route is also available at /rfq on this same domain. No price, stock or lead time is returned automatically.

RFQ summary

This is exactly what your enquiry currently contains. Anything still open stays visibly open rather than being guessed at.

Buyer
NameNot provided
CompanyNot provided
CountryZimbabwe
EmailNot provided
Phone / WhatsAppNot provided
Requirement
Bar formDeformed reinforcing bar
Diameter / lengthNot provided
Grade / standardNot provided
QuantityNot provided
Route & basis
DestinationNot provided
IncotermNot provided
Load portNot provided
Discharge portNot provided
Onward locationNot provided
Required dateNot provided
Evidence
Documents requestedNot provided
ReferenceNot provided

The copy includes only what you have entered. If you would rather raise the enquiry directly, send it to sales@noordeirasteel.ae.

Contact options

Reach the commercial department directly

Three direct routes, plus the RFQ above. The form remains the fastest way to get a comparable enquiry in front of a reviewer — the direct channels are for questions the form cannot carry.

WhatsApp Us

Registered office: Office 3303, Churchill Executive Tower, Business Bay, Dubai, United Arab Emirates. No Zimbabwe office or local stock position is claimed anywhere on this page. Material is offered for export from the UAE only once availability and terms are confirmed for the specific lot.

WhatsApp is shown against the published commercial mobile number. Confirm the number is still monitored for export enquiries before release.

Working hours are stated in Gulf Standard Time (UTC+4), which is two hours ahead of Zimbabwe. A message sent late in the Zimbabwean day reaches the desk the following morning.

FAQ

Questions buyers in Zimbabwe ask before an RFQ

Short answers, in the condition they actually hold. Where a question can only be settled by your specification or your importer, the answer says so.

Can you supply rebar to Zimbabwe?
We quote steel rebar for export from the UAE against a stated specification. Availability for a specific lot, and the shipping arrangement that would carry it, are confirmed after the enquiry rather than assumed from the destination. Zimbabwe is served as an inland destination: the sea leg ends at a nominated port and the inland movement is agreed separately.
Can I request CFR or CIF pricing?
Yes, against a named seaport. CFR and CIF both require a specific discharge port to be named — they cannot be written against the country as a whole, because Zimbabwe has no seaport. Once you name the port, freight feasibility for that route is checked before an offer is issued.
What sizes, grades and standards are available?
Tell us the sizes, grades and standard edition your project specifies and we confirm what can be offered against that requirement. We do not publish a standing size or grade list, because what is offerable changes with the lot and with origin.
Can I order bulk or project quantities?
Yes — bulk and project tonnages are the normal basis for this route. State the MT quantity and whether the requirement is a single delivery or phased across a programme, and capacity is confirmed against that.
Can you provide MTC or third-party inspection?
You can request mill test records, a specification statement, and third-party inspection as part of the enquiry. Each is confirmed for the offered lot before dispatch rather than promised on the page. Where inspection is required, nominate the scope and the point in the chain at which it applies.
How do I request a price per ton?
Send the diameter, grade, standard edition, quantity in MT, the named discharge port or inland destination, and the Incoterm you want. A price per MT is issued against those fields. No indicative or “from” price is shown on this page, because it would not be a number you could transact.
Can I buy from Dubai or the UAE for Zimbabwe?
Yes, and it is worth separating three things the phrase can mean. Material exported from the UAE is dispatched through a UAE port. Dubai stock is material physically held in Dubai. UAE-manufactured means produced by a UAE mill. These are different commercial facts, and where the goods were made is not inferred from where they load.
What do you need for a quote?
Technical: bar form, diameter and length, grade, standard and edition. Commercial: quantity in MT and the mass basis, the named UAE loading point and discharge port, the Incoterm, the required date, and the document or inspection scope. A project or tender reference helps if the enquiry belongs to one.
Can you deliver to an inland site in Zimbabwe?
Request the named receiving point and tell us who is responsible for each leg — sea freight, port clearance, and the inland movement. Any onward service beyond the discharge port is confirmed against a named place and a specific term in the quotation. We do not imply a guaranteed route, a transit service, or a fixed delivery time.
Which port will the material discharge at?
You nominate it. Because Zimbabwe is landlocked, the discharge port is a commercial choice that depends on your clearing arrangements and the inland leg that follows. Name the port you intend to clear through and freight feasibility to it is checked in the quote.