Export supply · UAE to Egypt
Steel Rebar Supply from UAE to Egypt
Request a bulk or project rebar quotation for Egypt; specify the bar, quantity, destination and FOB, CFR or CIF basis.
Material may be offered for export from UAE / Dubai / Jebel Ali only after availability and terms are confirmed. Nothing on this page is a statement that a particular size, grade, quantity or document is currently in stock or currently offerable.
Free to submit. No price, stock position or lead time is returned automatically — a reviewer responds on the basis you state.
What this page is quoted on
- Product
- Steel rebar / reinforcing bar, quoted per specification
- Export location
- UAE — dispatched through a UAE port on confirmation
- Destination
- Egypt — quoted to a named port or inland site
- Quote basis
- FOB named UAE port · CFR / CIF named Egypt port
- Price
- Price on request — no per-MT figure is published here
- Standard
- Your tender's ES number, verified against the EOS catalogue
The flag identifies the destination market. No Egypt office, branch or local stock position is claimed.
Product
What can the buyer request?
This page sells steel rebar — reinforcing bar — for export against a specification. Deformed bar is quoted where the requirement calls for it. The quotation is written against the exact bar you specify, not against a product description on a page.
“Iron rod” and how the quote is actually written
Local terminology varies, and an enquiry written as “iron rod” or “reinforcement rod” is understood as an enquiry for steel rebar. What governs the quotation is the precise steel specification, not the trade name — because two enquiries using the same local term can describe entirely different bars. Give us the diameter, grade and standard, and the terminology stops being a source of ambiguity.
We do not publish a standing list of available sizes and grades, because what can be offered changes with the lot, the origin and the time of enquiry. Instead, you state the requirement and we confirm what can be supplied against it.
Specify these on the RFQ; we confirm against the offer
None of the following is filled in on this page. They are the fields your enquiry has to carry, and they are checked against the offered lot rather than assumed from it.
- Diameters
- Every bar size the schedule calls for. A schedule range is not a substitute for the sizes listed on it.
- Stated by the buyer on the RFQ
- Grades
- The grade designation the structural design specifies, written exactly as the drawing or tender states it.
- Stated by the buyer on the RFQ
- Standards and editions
- The standard number and its edition year. An edition is part of the specification, not a detail for later.
- Stated by the buyer on the RFQ
- Lengths
- Stock length or cut length, and whether the order is straight bar, coiled, or cut and bent.
- Stated by the buyer on the RFQ
- Minimum / project tonnage
- The tonnage you need, and whether it is actual or theoretical mass. Project quantities are quoted per enquiry.
- Stated by the buyer on the RFQ
- Bundling and packing
- Bundle configuration, tag format, and how the mark must reconcile to the certificate for your receiving check.
- Stated by the buyer on the RFQ

Editorial illustration of an industry practice. It does not depict Noor Deira Steel stock, a Noor Deira Steel facility, or a certificate belonging to this business.
No automatic grade conversion
Where a project specifies a grade under one system and an offer is available under a comparable one, the equivalence is not assumed. Any substitution is put to you explicitly, with the basis stated, for your engineer to accept or reject.
Requirement versus offer
The left column is what your enquiry must carry. The right column is what the quotation does with it. The gap between them is where most rebar disputes originate, so it is set out rather than glossed over.
| Item | What the buyer states | How the offer treats it |
|---|---|---|
| Product / bar form | Deformed bar, plain round, coil, or cut and bent. | Confirmed against the offered lot, not assumed from the enquiry wording. |
| Standard / edition | The ES standard number and edition the tender requires. | Withdrawn or superseded editions are not silently substituted. |
| Grade | As written on the structural drawing or tender schedule. | No automatic grade conversion between systems. |
| Diameter / length | Every size on the schedule, with lengths. | Quoted per size; mixed-size lots are priced as such. |
| Tolerance / mass basis | State whether actual or theoretical mass governs. | The mass basis used is declared in the offer. |
| Quantity in MT | Total tonnage, and whether partial bundles are acceptable. | Availability at the stated tonnage is confirmed, not implied. |
| Marking / bundle ID | How bundles must be tagged for your receiving reconciliation. | Marking convention confirmed for the lot before loading. |
| Required evidence | What must exist before dispatch, and who accepts it. | Each document item confirmed as its own line in the offer. |
Export location
Where is export supply arranged?
Three phrases that sound interchangeable on an enquiry form and are not. Separating them is the difference between a quotation you can rely on and one that collapses at the loading point.
- This page's basis
Material exported from UAE
Goods consolidated and dispatched through a UAE port under an export sale. This is the commercial basis this page is written for.
Availability for a specific lot is confirmed on enquiry, never assumed from the destination alone.
Material located as Dubai stock
Goods physically held in Dubai warehouses at the time of enquiry, potentially shorter lead time than a fresh consolidation.
A stock position is only stated where one has been verified for the size, grade and quantity in question.
Material manufactured in UAE
Goods produced by a UAE mill, which is a statement about production origin rather than about where the goods currently sit.
Mill origin is only claimed where proven for the offered lot. It is not inferred from the loading port.
Loading point
Confirmed, never assumed
Jebel Ali is a major UAE port and a common loading point for export consignments. This page does not state that every enquiry loads there.
The port a consignment actually loads from is a commercial decision taken against the lot, the vessel and the terms. For an FOB quotation it has to be named to be a complete term — so if you need the offer written against a specific UAE port, say so in the RFQ.
No confirmed export or load point is published on this page. Naming one before it is verified for your enquiry would misrepresent what is guaranteed — so it is established during the quotation instead.
The RFQ asks which of the three you are buying, so the offer is written to match.
Supply to Egypt
Can delivery be quoted?
Egypt has real seaports, so this is a direct sea destination — which makes the port you nominate the single most important field on the enquiry. A discharge-port quotation and a delivery-to-site quotation are different quotations, and conflating them is where cost surprises come from.
A CFR or CIF price ending at a port is not a delivered price. Those terms stop at the named seaport. If your material has to reach a site inland of that port, that is a separate movement with its own named place, term and responsibility — quoted separately, and only where it is feasible.
What the RFQ has to establish
Six things. None of them can be assumed on your behalf, because each one changes who is responsible when something goes wrong.
- Named Egyptian destination port
- Name the port you will clear through. A discharge-port quotation is written against that named place, not against the country.
- Final city or project site
- Where the material actually has to end up, if that is inland of the port. A delivery quote naming a site is a different quotation from one naming a port.
- Importer-side handoff
- Who clears the consignment and who takes responsibility at the port. Naming that party is what keeps the boundary between your side and ours unambiguous.
- Incoterm and its named place
- FOB needs a UAE port. CFR and CIF need a named Egyptian seaport. An onward delivery needs its own place and term.
- Required date
- The date the material is needed at the receiving point, not the date it leaves the UAE. Freight and clearance sit between those two dates.
- Onward delivery, if required
- Whether you need movement beyond the discharge port, and who would arrange it. This is quoted separately and only where feasible.
Terms, and the place each one needs
FOBNamed UAE port
The sea leg is yours from a port you have named. FOB needs a named UAE loading point to be a complete term.
CFRNamed Egypt port
Freight is included to the Egyptian seaport you name. It does not extend to an inland city or project site.
CIFNamed Egypt port
Freight plus the agreed marine insurance cover to that same named seaport.
Onward deliveryNamed inland place
A separate agreement naming the receiving point, the term and the responsibility split. Quoted only where it is feasible.
No route is promised
This page does not state a sailing schedule, a route or a fixed delivery time, and it does not claim a guaranteed UAE-to-Egypt service. It also does not assume a port for you. Shipping feasibility is checked against the actual consignment and your nominated port before any offer is issued, and where a basis cannot be supported it is said plainly rather than quoted anyway.

Two different quotations
A price that ends at the port and a price that ends at your site are not the same offer, and the difference is the leg between them. Naming the discharge port on the enquiry is what makes the comparison honest.
Editorial illustration of an industry practice. It does not depict a Noor Deira Steel shipment, client or route.
Price
What will it cost?
Plainly: no fixed price per MT is available on this page, and none is invented here. The current quote depends on your specification and your commercial basis.
What the per-MT figure depends on
01Specification
Diameter, grade and the standard edition. A tighter or less common specification moves the price more than tonnage does.
02Quantity
Tonnage and whether it divides evenly into standard bundles. Small or fragmented lots carry a different cost base.
03Origin and availability
Where the material actually comes from for this lot, which is a commercial fact confirmed on enquiry rather than a constant.
04Named loading and destination points
The UAE port it loads from and the Egyptian port it lands at. Both are part of the price, and both have to be named.
05Incoterm
FOB, CFR or CIF, and whether an onward leg is included. Each step in the chain is a separate cost line.
06Inspection and documents
Third-party inspection, additional testing and document scope are priced as their own lines, not absorbed silently.
An indicative or “from” price is not shown because it would be a number you could not transact. A price per MT is issued once the specification, the tonnage, the named places and the Incoterm are on the table.
Submit a project schedule or BOQ
If your requirement is a full bar schedule, a tender BOQ or a multi-line package, send it through the RFQ rather than summarising it. A schedule carries the size, grade, length and quantity detail that a paragraph cannot, and it is what the quotation is actually written against.
What you can ask to be priced
- Price per MTAgainst your stated diameter, grade, standard and tonnage.
- FOB, named UAE portA loading-point basis you control the freight on.
- CFR, named Egypt portFreight-inclusive to the port you nominate.
- CIF, named Egypt portFreight and agreed marine insurance to that port.
- Onward deliverySeparately agreed, against a named inland place and term.
- Optional scopeInspection, testing and document items, priced as their own lines.
Only commercially feasible options are presented in the eventual offer. If a basis cannot be supported for your lot, it is said plainly rather than quoted anyway.
Standards, quality & documents
How is the specification checked?
EOS standard lookup to order matrix. The buyer enters the tender's standard number and edition; the offered grade, diameter and test evidence are then reconciled to that reference, and whatever remains open on the import or project side is carried into the RFQ rather than answered here.
EOS lookup & reconciliation gate
0 of 6 items known
Enter the standard your tender names — not a default, and not a grade name standing in for a standard number. The comparison against the offer is what this gate is for.
Open items are not a problem — they are the reason the RFQ exists. Everything still unanswered here is carried into the enquiry as a question rather than resolved on this page.
This page does not state that rebar is subject to any particular Egyptian obligation, and it does not assert an import or acceptance pathway for your consignment. Those are questions for your engineer and importer, carried into the RFQ as open items.
Who confirms what
Regulatory and conformity scope for the exact product and shipment is confirmed by the importer and the project engineer. The supplier states what the offered lot carries. This page does neither on their behalf.
Importer
Whether any conformity obligation applies to this consignment, and what the import route requires.
Importer / project engineer
The standard, edition and acceptance criteria for the exact product, and the evidence required.
Supplier
The specification, marking, test evidence and document scope actually available for the offered lot.
Primary source
EOS standards catalogueVerified reachable at build time: the page is titled “Purchase and Search Egyptian Standards” and offers a searchable, purchasable catalogue (at the time of checking it reported 12,756 results across 426 pages). It carries an “Obligatory Status” filter with “Obligatory” and “Not Obligatory” options, alongside sector and committee filters.
What that does and does not establish. The catalogue lets you identify a standard by number and title and see whether it is flagged obligatory. It does not, by itself, prove that a given mill, grade or shipment is accepted for your tender or cleared for import. Confirm the current edition against your exact product and grade, then confirm acceptance separately with your engineer and importer. This page makes no claim that rebar is covered by any particular obligation.
Document and inspection matrix
What can be asked for, what it covers, and who confirms it. Nothing in this table is a statement that any item is currently available.
| Document / inspection item | Scope it covers | Confirmed by |
|---|---|---|
| MTC / mill test records | Heat-level chemical and mechanical results for the steel supplied. | Requested by the buyer; confirmed for the lot before dispatch.Subject to confirmation with the offered lot |
| Specification statement | The standard and grade the material is supplied against. | Requested by the buyer; confirmed against the offered lot.Subject to confirmation with the offered lot |
| Packing list | Bundle count, marks and the weights per bundle. | Confirmed by the supplier for the shipment loaded.Subject to confirmation with the offered lot |
| Commercial invoice | The commercial basis of the sale and the stated Incoterm. | Issued by the supplier against the agreed terms.Subject to confirmation with the offered lot |
| Origin documentation | Where applicable to the destination's import requirements. | Requested by the buyer; confirmed for the lot before dispatch.Subject to confirmation with the offered lot |
| Export documents | The documents required to move the consignment out of the loading point. | Requested by the buyer; confirmed for the shipment.Subject to confirmation with the offered lot |
| Conformity / certification scope | Whatever the importer's confirmed route requires, and at what point it applies. | Requested by the buyer; confirmed for the offered lot.Subject to confirmation with the offered lot |

On a framed structure the pour is scheduled around the steel being on site and accepted. Evidence that had to exist before dispatch is what makes that date achievable — not something to settle after the material has landed.
Editorial illustration of an industry practice. It does not depict a Noor Deira Steel project, client or site.
How to order
Six steps, in order
Short, and sequential. Each step produces something the next one needs, which is why the order matters more than the speed.
- 1
Send the RFQ
Put the requirement in the form so it arrives with a specification attached, rather than as a request to be followed up.
- 2
Specify size, grade and standard
Diameter and length, grade, and the ES standard with its edition year. This is what the quotation is written against.
- 3
Give the quantity in MT
State the tonnage and whether actual or theoretical mass governs, so the mass basis is agreed before it matters.
- 4
Name the port and final destination
The Egyptian port you clear through, and the city or site if the material has to travel beyond it.
- 5
Request FOB, CFR or CIF
With the named place and the document or inspection scope you need attached to the request.
- 6
Receive the quotation
Issued once feasibility and the evidence plan are confirmed. Only options that can actually be supported are quoted.
No response time is promised on this page. Enquiries are reviewed by the commercial desk on the basis you state, and the completeness of your specification is what determines how quickly a usable answer comes back.
Request Rebar Quote
Send a qualified Egypt rebar RFQ
This collects a comparable specification and route. It does not return a price, a stock position or a delivery promise — a person reviews the enquiry and responds on the basis you state.
RFQ summary
This is exactly what your enquiry currently contains. Anything still open stays visibly open rather than being guessed at.
- Buyer
- NameNot providedCompanyNot providedCountryEgyptEmailNot providedPhone / WhatsAppNot provided
- Requirement
- Bar formDeformed reinforcing barDiameter / lengthNot providedGrade / standardNot providedQuantityNot provided
- Route & basis
- DestinationNot providedIncotermNot providedLoad portNot providedDischarge portNot providedOnward locationNot providedRequired dateNot provided
- Evidence
- Documents requestedNot providedReferenceNot provided
The copy includes only what you have entered. If you would rather raise the enquiry directly, send it to sales@noordeirasteel.ae.
Contact options
Reach the commercial department directly
Three direct routes, plus the RFQ above. The form remains the fastest way to get a comparable enquiry in front of a reviewer — the direct channels are for questions the form cannot carry.
Registered office: Office 3303, Churchill Executive Tower, Business Bay, Dubai, United Arab Emirates. No Egypt office or local stock position is claimed anywhere on this page. Material is offered for export from the UAE only once availability and terms are confirmed for the specific lot.
WhatsApp is shown against the published commercial mobile number. Confirm the number is still monitored for export enquiries before release.
Working hours are stated in Gulf Standard Time (UTC+4), which is one hour ahead of Egypt. A message sent late in the Egyptian day reaches the desk the following morning.
FAQ
Questions buyers in Egypt ask before an RFQ
Short answers, in the condition they actually hold. Where a question can only be settled by your specification or your importer, the answer says so.
- Can you supply rebar to Egypt?
- We quote steel rebar for export from the UAE against a stated specification. Availability for a specific lot, and the shipping arrangement that would carry it, are confirmed after the enquiry rather than assumed from the destination. Name your Egyptian discharge port and the requirement, and feasibility is checked against both.
- Can I request CFR or CIF pricing?
- Yes, against a named Egyptian seaport. CFR and CIF both require a specific destination port to be named to be complete terms. Once you name it, freight feasibility for that route is checked before an offer is issued. Neither term extends to an inland site on its own.
- What sizes, grades and standards are available?
- Tell us the sizes, grades and Egyptian Standard number your tender or project requires, and we confirm what can be offered against that reference. We do not publish a standing size or grade list, because what is offerable changes with the lot and with origin.
- Can I order bulk or project quantities?
- Yes — bulk and project tonnages are the normal basis for this route. State the MT quantity and whether the requirement is a single delivery or phased across a programme, and capacity is confirmed against that.
- Can you provide MTC or third-party inspection?
- You can request mill test records, a specification statement, and third-party inspection as part of the enquiry. Each is confirmed for the offered lot before dispatch rather than promised on the page. Where inspection is required, nominate the scope and the point in the chain at which it applies.
- How do I request a price per ton?
- Send the diameter, grade, the ES standard number and edition, quantity in MT, the named Egyptian discharge port or inland destination, and the Incoterm you want. A price per MT is issued against those fields. No indicative or “from” price is shown on this page, because it would not be a number you could transact.
- Can I buy from Dubai or the UAE for Egypt?
- Yes, and it is worth separating three things the phrase can mean. Material exported from the UAE is dispatched through a UAE port. Dubai stock is material physically held in Dubai. UAE-manufactured means produced by a UAE mill. These are different commercial facts, and where the goods were made is not inferred from where they load.
- What do you need for a quote?
- Technical: bar form, diameter and length, grade, and the ES standard number with its edition. Commercial: quantity in MT and the mass basis, the named UAE loading point and Egyptian discharge port, the Incoterm, the required date, and the document or inspection scope. A project or tender reference helps if the enquiry belongs to one.
- Which Egypt port can you quote?
- You nominate it. Name the port your importer intends to clear through and freight feasibility to that port is checked in the quotation. This page does not assume a port, a sailing schedule, a route or a freight charge on your behalf.
What a quote needs from you
- 1Diameter and length, listing every size on the schedule.
- 2Grade and the ES standard number with its edition year.
- 3Quantity in MT, stating whether actual or theoretical mass governs.
- 4The Egyptian port you will clear through, and any inland site.
- 5The Incoterm you want, with its named place attached.
- 6The evidence that must exist before dispatch, and who accepts it.
- 7A project or tender reference, if the enquiry belongs to one.
Related resources
- Africa steel rebar supplier hubThe continental route covering every destination market we publish.
- North Africa rebar regionThe regional grouping Egypt sits inside.
- MoroccoThe western North African destination route on the same continental hub.
- AlgeriaThe neighbouring North African destination route.
- Steel rebar product specificationsCore product scope before narrowing to a form, size or evidence route.
- Deformed steel rebarForm-specific requirements rather than rebar in general.
- Rebar sizes referenceCheck a size schedule against a stated basis before writing it into the enquiry.
- Rebar weight chartCheck the mass basis against the schedule before it is written into the enquiry.
- Rebar for constructionThe construction industry route where the works condition changes the requirement.
- Send a qualified rebar RFQThe full quotation desk route on this same domain.
