S235JRH Hollow Section · BS EN 10210 Series
S235JRH Hollow Section
S235JRH is a designation, not an order. Before it can be quoted, the series it belongs to and the edition of the standard that governs it have to be named, because the cold-formed and hot-formed series differ in how the section is made, which tolerance table applies and where the test pieces are taken from. Confirm the standard and edition your engineer intends, then the shape, dimensions with units, delivery condition and the certificate package you will accept.
Price on request · availability, origin and document package confirmed against the live enquiry
Choose the route that fits the requirement
Specify S235JRH Hollow Section around the job
S235JRH Hollow Section is only a useful purchase description when the governing requirement, dimensions, service conditions, testing and document expectations are stated with it. Treat nearby routes as comparisons, not automatic substitutes. Price, stock, origin, certification and delivery timing are confirmed only against the live enquiry. Start with the requirement that decides fit, then provide the missing order inputs.
Governing standard & edition
The designated standard and its edition fix scope, the grade range available, tolerances, testing and ordering requirements. Name the standard and edition exactly — a grade designation is not a specification, and the edition controls the requirements that apply.
Grade designation & suffix
The full grade designation carries a delivery condition and, where present, a suffix that changes the impact-testing requirement. Use the complete designation and keep it separate from the project requirement, which can add to the standard.
Shape, dimensions & tolerance
Section shape, nominal dimensions with units, wall and the applicable tolerance regime fix the piece. A nominal chart value is not an acceptance tolerance unless the governing document says so.
Service environment & toughness
Service environment and any toughness or impact-testing requirement are decisions the governing document controls. Order the testing only where the standard, the grade suffix and the service call for it.
Confirm the series before the designation
Fix which series the project actually cites
S235JRH is the detail most likely to be carried onto a drawing by habit rather than from the specification. Before the enquiry goes out, confirm whether the project cites the cold-formed welded series or the hot-formed series, because the two carry different manufacturing routes, different dimensional tolerance regimes and different test positions — and a supplier who is not told which one applies will quote the one they stock most of. State the standard and edition your engineer intends, and treat any adjacent designation as something to be raised with them rather than swapped in.
Specification gate
Build a checkable enquiry
The S235JRH route is governed by a European designation whose requirements sit inside a named part of the standard, so the citation itself is the first input: the standard, the part and its edition. The gate then asks for the delivery condition as its own field, the thickness, the shape and dimensions with units, quantity and unit basis, the fabrication and inspection scope, the document list and the destination. Open items are shown as open, never filled by assumption.
RFQ summary
Standards, grades, dimensions & condition
Write the specification so offers can be compared
S235JRH is a European designation carrying both a minimum strength and a room-temperature impact class, so write those as separate requirements rather than one grade name. Add the standard, part and edition, the thickness and form, nominal dimensions with units, quantity and unit basis, the delivery condition, the documents required and the destination.
Standard, edition & grade designation
The governing standard and its edition fix the scope, the grade range available, tolerances, testing and ordering requirements. Name the standard and edition, and use the complete grade designation rather than a shortened form — the edition controls which requirements apply.
Dimensions, wall & tolerance regime
State the section family, nominal dimensions with units, wall, length or cut requirement and surface requirement together, and name the tolerance regime the governing document references. A nominal chart value is not an acceptance tolerance.
Project requirement over the standard
A governing design or project specification can impose requirements beyond the standard. Both are stated explicitly, and neither is inferred from the other — the grade designation alone is not a complete purchase specification.
Reference before ordering
Confirm a dimension or size input before it reaches the RFQ
Use a reference to check scope and terminology, then compare that scope with the project requirement. A reference does not replace the contract documents for the actual order.
| Requirement context | Governing basis | Applies to / limitation | Keep as a separate decision | RFQ field |
|---|---|---|---|---|
| Section ordered to a hot-formed grade designation | BS EN 10210 series — applicable edition named | Applies where the governing document specifies a hot-formed structural hollow section. Confirm the edition, grade range, tolerances, testing and ordering requirements against the project requirement — the designation alone does not complete the order. | Delivery condition, tolerance regime, toughness / impact testing | Standard / edition + grade |
| Section ordered to the cold-formed route | BS EN 10219 series — applicable edition named | A different route with its own scope, tolerances and properties. Close out every input against the standard you named before anything is priced. Until then, a nearby designation remains a question for your engineer rather than a substitute you have accepted. | Product form, grade, dimensions, fabrication implications | Standard / edition + dimensions |
| Project specification beyond the standard | Governing project specification / code | Where a project specification imposes requirements beyond the standard, those requirements are ordered explicitly and confirmed against the actual supply. | Supplementary requirements, inspection scope, documents | Supplementary requirements |
This table is a decision aid only and carries no mechanical value or numerical technical value. Technical choices are conditional on the selected standard and grade; every dimension, tolerance, condition or test figure is confirmed against the governing standard, its edition and the material certificate before quotation. Price on request.
Documents & inspection
Match documents and inspection to the order
Decide what you will accept as evidence before you order. For a designation with a suffix, that usually means a certificate issued against the standard and edition the order cites, with the mechanical results at the test positions the specification names. Say which document you need and who will review it; whether any particular certificate or approval can be supplied is confirmed for the actual consignment rather than assumed here.
- Material certification and traceability for the steel supplied, per consignment
- Chemistry and mechanical test record against the governing standard, edition and grade designation
- Impact / toughness test record only where the grade suffix, standard and order require it
- Dimensional and inspection records where the order requires them
- Condition and surface checks against the agreed route
- Heat / lot traceability to the shipped consignment
- Commercial invoice and packing list
- Shipment / origin documents only where applicable to the consignment
- Customs declaration inputs for the destination
What is evidenced, and what stays order-specific
- Material certification and traceability are requested for the steel supplied, against the governing standard, its edition and the full grade designation — never an assumed certificate.
- Impact and toughness testing are tied to the grade designation and suffix and the service environment, and are ordered only where the standard and the order call for them.
- Availability of any certificate or approval is confirmed for the actual supply — not assumed from this page or from a nearby route.
Operating duty
Where operating duty changes the choice
Open an application page when the end use changes the series question — an exposed architectural member and a covered structural one can lead you to different choices. Where the use does not affect the selection, the standard and series pages carry the decision. The same designation can suit one application and not another, because the series, the exposure and the connection detail each pull the requirement in a different direction.
Columns
Column duty: reconcile shape, nominal dimensions, wall, grade designation and the governing design basis before the enquiry is fixed.
Explore ColumnsMachinery frames
Frame context: check whether connection detailing, service environment, finish, inspection or documentation changes the order.
Explore Machinery framesSolar structures
Solar structure service: confirm the exposure condition, tolerance, condition and testing inputs the governing document expects before the specification is frozen.
Explore Solar structuresGCC markets & destination planning
Plan the GCC destination separately from the steel specification
Keep product compliance separate from destination planning. Confirm consignee/importer details, named port or inland delivery point, Incoterms rule and named place, shipment documents, any permit/conformity steps required for the actual goods, and the party responsible for each action. No country card implies a local office, warehouse or stock position.
United Arab Emirates
Destination & importer inputs
Move from S235JRH Hollow Section selection to the exact UAE procurement route: carry the standard edition, grade, section shape, nominal dimensions, tolerance regime, quantity and destination emirate so the quotation and document set match the import.
United Arab Emirates hollow-section procurement
Saudi Arabia
Project specification & import inputs
Confirm the standard and edition, grade, shape, nominal dimensions, tolerance regime, quantity and required-on-site date so the estimate and logistics stay aligned to the governing project specification.
Saudi Arabia hollow-section procurement
Bahrain
Industrial supply inputs
Coordinate the standard edition, grade, impact-testing and inspection requirements, document list and delivery point to the Bahrain requirement so the section and its document set stay aligned.
Bahrain hollow-section procurement
Kuwait
Contractor procurement inputs
Link section selection and any cutting or processing to the fabrication and inspection needs, with the delivery point and Incoterms named place agreed against the requirement.
Kuwait hollow-section procurement
Oman
Port-oriented supply inputs
Confirm the specification, nominal dimensions, quantity, document package, port and Incoterms rule so the Oman quotation and logistics stay aligned to the order.
Oman hollow-section procurement
Qatar
Specification & delivery inputs
State the standard and edition, grade, shape, nominal dimensions, delivery condition, documents and delivery location so the Qatar quotation is fixed on a verified basis.
Qatar hollow-section procurementCommercial inputs
Commercial inputs that remain quotation-dependent
What a supplier needs before this can be priced is the designation you intend and the series it sits in, the shape and dimensions with units, the quantity and unit basis, the delivery condition, the tests and documents you will require, the destination and the named Incoterms place. Freight, availability and delivery timing are checked against the live shipment, so they are confirmed on the quotation rather than read off this page.
Packing
Sections bundled, strapped, tagged and marked by shape, nominal size, wall, grade, heat and lot, matched to the declared route. Packing expectations are confirmed in the enquiry.
Delivery point & schedule
Name the consignee or importer, the port or inland delivery point and the required-on-site date. Timing is checked for the live shipment and stated on the quotation.
Incoterms rule & named place
State the Incoterms rule and the named place so packing, transport and document obligations are explicit, and name the party responsible for each action.
Carry the enquiry into the commercial department
Turn the designation, the series and edition you intend, the shape, dimensions, delivery condition, tests, documents, quantity, destination and Incoterms named place into one copyable summary. The commercial department checks the designation against the standard before quoting, so an unintended series or a missing suffix is raised while it can still be corrected.
Price on request — freight, duty, availability and delivery timing are confirmed with your quotation.
Technical reference
Confirm the source scope, then compare it with the requirement
Use the cited standard to check its own scope and terminology, and to see how it treats the series and suffix question, then compare that with what your project requires. The reference does not replace the contract documents for the actual order.
BSI — BS EN 10210 structural hollow sections series
Published standard scope · reviewed for scope and terminology
The BSI BS EN 10210 series is the published reference for hot-formed structural hollow sections. Use it to confirm its own published scope and terminology — the section families it covers, the delivery condition it describes and the requirements it sets — then compare that scope with the project requirement for the actual order.
What this means for your order: the reference helps fix the questions that must be answered in the RFQ — the standard and edition, the full grade designation, the section shape, the nominal dimensions with units and the tolerance regime. Conformity, certification and commercial outcomes remain separate, verification-dependent steps after the technical product description is complete.
What it does not cover: the reference does not prove Noor Deira Steel inventory, price, certification, local presence or project approval, and it does not replace the contract documents for the actual order. Verify the purchase order and the current licensed edition, because a project specification can impose requirements beyond the standard.
What a complete enquiry improves
A complete enquiry makes three things easier
What a well-written enquiry changes is where the risk sits. Instead of discovering at goods-in that the series was assumed rather than specified, the buyer settles the point while there is still time to choose — and any offer that comes back can be read against the exact designation, edition and test position the project requires.
Buyer concern
Specification from a grade designation
Evidence-led answer
Every value is forced against the governing standard and edition, the full grade designation, shape, nominal dimensions, tolerance regime and condition — never assumed from the designation alone.
A section whose basis is an auditable, order-driving input set.
Buyer concern
Automatic substitution between nearby grades
Evidence-led answer
The enquiry keeps the standard, edition, grade, product form, delivery condition, dimensions, tolerance regime and testing as separate decisions, so a nearby grade or standard is only a comparison until the governing requirement accepts it.
A section that matches the governing document rather than a similar-sounding grade line.
Buyer concern
Dimension and tolerance ambiguity
Evidence-led answer
Nominal dimensions with units, the tolerance regime referenced by the governing specification, and any length or cut requirement are carried together.
A section a fabricator can cut, weld and re-check against the governing document.
Buyer concern
Undocumented testing or traceability
Evidence-led answer
Testing, inspection and document needs are named explicitly, with the expected issuer, before any value is quoted — and the impact-testing requirement is tied to the grade suffix and the order.
An evidence set that matches the steel actually shipped, not an assumed certificate.
Buyer concern
Quotation gaps and destination surprises
Evidence-led answer
Processing, packing, destination, Incoterms named place, documents and required-on-site date are separate explicit fields, never buried in a price.
A quotation that states delivery and import expectations instead of hiding them.
From requirement to quotation
Every step names its owner, input and open item
Seven steps take a designation to a delivered consignment. At each one an open item stays visibly unresolved until the person who owns it confirms it — which on this route usually means the engineer settling the series before anything is priced.
Requirement
Buyer
In: Governing standard and edition, full grade designation, shape, nominal dimensions with units, quantity and unit basis.
Out: Service and governing document defined; route identified.
No standard or edition named.
Next: Name the standard and edition.
Condition & tolerance
Buyer + technical
In: Delivery condition, tolerance regime, length or cut requirement, surface requirement.
Out: Condition and tolerance basis stated.
Condition left implicit.
Next: Fix condition and tolerance inputs.
Tests & documents
Technical / inspection
In: Testing and inspection scope, required document list with expected issuer.
Out: Evidence and document package named.
Documents assumed, not requested.
Next: Confirm the document checklist.
Destination & importer
Buyer + commercial
In: Consignee / importer details, port or inland delivery point, Incoterms rule and named place.
Out: Destination and clearance owner explicit.
Importer or named place not confirmed.
Next: Add importer and named place.
Quotation
Commercial
In: Quantity and unit basis, processing scope, packing, documents and required-on-site date.
Out: Availability, commercial terms and document package confirmed for the live enquiry.
Open items carried into the offer.
Next: Receive the confirmed offer.
Packing & shipping
Supplier / forwarder
In: Strapping, tagging, marking, Incoterms rule, port.
Out: Coordinated to the named delivery point.
Document delay.
Next: Track to the delivery point.
Delivery & follow-up
Commercial
In: Site handover, closed-out documents.
Out: Handed to site with the document set.
Open claims.
Next: Close out.
Review unresolved items before quotation
Standard and edition, the full grade designation, product form, dimensions, condition, testing and document inputs, quantity, destination and commercial terms enter the enquiry together so the specification, the evidence and the delivery terms stay aligned.
Request a QuoteBuyer FAQ
Questions to settle before ordering
The questions that decide an S235JRH order — which series applies, what the suffix carries, and what the certificate has to show. Each answer points at what to confirm with your engineer rather than what to assume.
Which series does S235JRH belong to?
What has to be verified before the order is placed?
What should accompany the mill certificate?
What belongs in the RFQ?
Qualified RFQ
Request a qualified S235JRH Hollow Section quotation
Send the governing standard/edition, grade or material route, section shape and dimensions with units, quantity/unit basis, intended service, fabrication or connection notes, tests/inspection, required documents, destination and named delivery place. If an item is still undecided, mark it open rather than guessing. The quotation will confirm availability, commercial terms and the supply-specific document package.
Price on request · availability and commercial terms confirmed against the live enquiry
Related routes worth comparing
Open a related page to resolve one decision
A grade page answers a question about a designation. If what you actually need to settle is which series the project cites, the standard and series pages carry that decision more directly; the structural steel family is here only as a wider comparison, not as a like-for-like route.
Structural steel products
Open structural steel if you need to compare a hollow section against an open profile for the same member. It is a different product family with different connection behaviour, so treat it as a comparison rather than an alternative to the designation you are specifying.
Compare the structural steel form