Iron ore · 62% Fe grade
62 Fe Iron Ore Supplier
A 62% Fe offer is only usable inside the window your process actually accepts — and that window is yours to state, not ours to assume. The figure, the tolerance around it, the gangue it travels with and the basis each was determined on together decide whether an offer lands inside that window or merely close to it.
Every boundary buyer-entered, none published Price on request Response within one working day
Fit, alternatives and selection logic
When a 62% Fe offer clears your window — and when it only looks like it does
Substitution is a boundary question, not a ranking question. An offer can sit comfortably inside the band you accept on iron and still fail on a field the same window constrains, or sit exactly on a boundary where the answer turns on wording rather than on measurement. The three states below are where an offer can land.
The offer sits within the range your process accepts, on a basis matching the one your window was written against, with method, tolerance and sampling all stated. In this state the substitution is defensible and the remaining work is commercial rather than technical — quantity, destination, documents and terms.
- Figure falls inside both boundaries you have stated
- Offer figure reported on the same basis as the window
- Method, tolerance and sampling basis all named in the offer
This is the state that causes the most argument after delivery. The offer figure lands exactly on one of your boundaries, and whether that passes depends entirely on whether your window includes the edge. That is a contract term, so it has to be read from your wording before the offer is accepted rather than debated when the certificate arrives.
- Figure equals a boundary value exactly
- Inclusion or exclusion of the edge not written down
- Tolerance band around the offer figure left unstated
The offer falls beyond one of your boundaries and does not satisfy the iron field as you have stated it. A figure above the window is not automatically the safer case — the band is a commercial range, not a quality scale, and an offer can be rejected for exceeding an upper boundary just as for falling under a lower one.
- Figure beyond a boundary whether high or low
- Assumption that a higher figure is always acceptable
- Boundary breached on a field other than iron
A higher figure is not automatically safer. Grade bands are commercial ranges whose tolerances are fixed buyer-seller in the contract, and a neighbouring band is not an interchangeable specification. A 63.5% or 65% offer only substitutes if it clears every field your window constrains, on a comparable basis, and inside your boundaries — not because its iron figure is larger.
Related alternatives, grouped by the open question
These are the pages that sit closest to a 62% Fe enquiry. Each is a different decision rather than a substitute, so pick the group that matches what is still unresolved in your requirement.
Where the mineralogy or the physical form rather than the band itself is the open question.
Where the preparation state rather than the iron figure is what decides acceptance.
Where the band itself is what your process constrains.

Does this offer fit the band you accept?
State your window, then place the offer against it
Enter the range your process accepts and what an offer actually states. The tool reports whether the offer falls inside, outside or on a boundary of your window, and what evidence would still be needed before a boundary case could be accepted. It supplies no limits, no tolerances and no band of its own.
Your acceptance window and the offer
Boundaries come from your own schedule. Nothing is defaulted, and no limit is suggested on your behalf.
Nothing to show yet
Enter your lower boundary, your upper boundary and the offer figure. The position appears here once there is a window to place it against — this tool has no window of its own.
Scope: the position of an offer against a window you stated. No quality ranking, no supplier preference, no availability position and no band recommended — every boundary it uses was entered by you.
Send the window check for review
The result travels with your enquiry exactly as you entered it. Anything still unresolved — a boundary not yet written down, a method not named — stays on the record as an open question. Price on request.
Response within one working day. No obligation, and no availability claim is made by submitting this form.
Fields the window has to constrain
A window is a schedule, not a single number
If your window is written on the iron figure alone, it constrains one field and leaves the rest to the supplier. Each row below is a field that decides whether an offer actually fits the band your process accepts.
| Field | Why it constrains the window | Unit / basis | Verification method | What sets the boundary | Action |
|---|---|---|---|---|---|
| Fe content | The field most windows are written on, and the only one a band label expresses. | % — dry or wet, declared | Assay by the method your contract names | Your process and your acceptance schedule | State the boundary and the tolerance |
| Fe tolerance | Two offers on the same figure with different tolerances do not occupy the same place in your window. | % — the band attached to the figure | Stated in the offer and in the contract | Buyer-seller agreement | Require the tolerance to be stated |
| SiO2 | Raises slag volume and the energy per tonne of iron, so an offer can pass on iron and fail here. | % — dry basis as tested | Assay per the agreed method | Set by your process | Enter the limit explicitly |
| Al2O3 | Changes slag viscosity, and at higher levels can destabilise operation on some routes. | % — dry basis as tested | Assay per the agreed method | Set by your process | Enter the limit explicitly |
| P (phosphorus) | Carries into the metal and constrains which route can accept the material at all. | % — dry basis as tested | Assay per the agreed method | Set by your steelmaking route | Enter the maximum explicitly |
| S (sulphur) | Route-dependent, and more tightly constrained where the process is sensitive to sulphur in the metal. | % — dry basis as tested | Assay per the agreed method | Set by your steelmaking route | Enter the maximum explicitly |
| Moisture | A window written on a dry figure and one written as received are different windows. | % — as received or as determined | Determination per a named moisture method | Contract wording defines the adjustment | State the basis the window uses |
| Size distribution | A material inside your band numerically can still fall outside the sizing the receiving step accepts. | mm with stated cut points | Screening or laser method, named | Agreed against your receiving process | State distribution plus method |
| Sampling basis | The figure that decides the boundary case has to come from a sample accepted at your hold point. | Method and sampling frequency | Standards-based lot sampling regime | Purchaser and supplier agree the basis | Name the sampling basis |
No figures published. This page states no iron content, impurity value, tolerance, moisture level or size range for any material. Every field above depends on your deposit requirement, your process and your contract, and each must be established by a named method on a stated basis in your own enquiry.
Standards that would carry the verification
A boundary case is settled by evidence rather than by argument, and two standards produce most of that evidence: one for how the lot is sampled, one for how iron content is determined.
These routes explain what each standard covers and where its scope ends. Neither substitutes for the edition your contract cites, and neither implies that any material meets them.

Quality, testing and documentation
What settles a boundary case — and what does not
A boundary case is decided by evidence, not by the closeness of two numbers. Each item below is what would have to be in place before an offer on the edge of your window could be accepted rather than argued about.
| Evidence | What it settles | Who supplies / verifies | When required | What stays a project decision |
|---|---|---|---|---|
| Certificate of analysis, per lot | The lot-specific figures for every field your window constrains, not only the iron figure. | Issued against the agreed assay method; the issuing laboratory is confirmed per enquiry. | At the enquiry stage, as the basis for the boundary decision. | Which elements are reported, and to what method scope, remains yours to specify. |
| Tolerance statement | Whether the offer figure occupies a band or stands as a point figure against your boundary. | Stated by the supplier in the offer and fixed in the contract. | Before a boundary case is treated as passing. | The direction and width of the tolerance remain a buyer-seller agreement. |
| Sampling and inspection record | Whether the figure that decides the boundary is defensible at your hold point. | Issued against the agreed sampling standard and any appointed inspection party. | Agreed at enquiry, not at the port. | Whether a third-party inspection party is appointed remains a project decision. |
| Analytical method statement | Whether the figure was produced by a method comparable with the one behind your window. | Named by the issuing laboratory against the agreed method. | At the enquiry stage. | Which method your contract cites is yours to set. |
| Origin and shipping documents | Customs clearance, and any origin requirement your market imposes. | Issued per shipment. | Before dispatch. | Relevant only where your project or jurisdiction imposes an origin requirement. |
This page publishes no stock position, availability statement, lead time, shipping schedule, mine or mill ownership, or certification claim for any material. Every row above is a question to be confirmed per enquiry.

Gates before a boundary case is accepted
- 1Wording gateWhether the boundary is included or excluded is read from your contract before the figure is classified, not after.
- 2Tolerance gateThe band attached to the offer figure is stated, because a point figure cannot be placed against a boundary.
- 3Basis gateIron, moisture and sizing figures each carry a stated basis matching the one your window uses.
- 4Method gateThe analytical method behind the offer figure is named and compared with the method your window was written against.
- 5Sampling gateThe sampling and preparation basis is agreed at enquiry, so the figure is defensible at the hold point.
- 6Chemistry gateEvery field your window constrains is checked, because an offer can pass on iron and fail on gangue.
Certification limits: this section describes document types and their verification roles. It makes no claim about which certificates Noor Deira Steel holds, which party issued any prior report, or what any future lot will be certified to.
Application and industry decision paths
Where the window is written differently on each route
The band your process accepts is not the same window across routes, because each one constrains a different set of fields. These are the related process and sector pages, and what each changes in your acceptance criteria.
Blast furnace burden
- Operating condition
- A burden where chemistry, gangue and physical form together determine furnace performance.
- What shifts in the specification
- The window widens on iron and tightens on gangue, because the furnace absorbs variation in the figure but not in the slag balance.
- Why routes are not interchangeable
- A window written for a prepared burden cannot be applied to a raw feed, because the upstream step already changed the material.
Direct reduction (DRI)
- Operating condition
- Reduction to metallic iron without melting, where the ore's behaviour in reduction governs.
- What shifts in the specification
- Reducibility and low residual elements move into the window, and the iron band alone stops being a sufficient boundary.
- Why routes are not interchangeable
- A window set for a blast furnace accepts variation a direct reduction route will not, so the two cannot share a specification.
Steel production
- Operating condition
- Feed into a steelmaking chain where residual elements and consistency affect the finished product.
- What shifts in the specification
- Phosphorus and sulphur come under the tightest bounds, often tighter than the band itself.
- Why routes are not interchangeable
- Steelmaking acceptance follows the finished product specification rather than the ore's nominal band.
Pellet plants
- Operating condition
- Plants converting a fine feed into pellets, where output grade follows input grade.
- What shifts in the specification
- Variance between lots enters the window alongside the mean figure, because a plant cannot hold output if the input moves.
- Why routes are not interchangeable
- Consistency is a procurement criterion here in a way it is not for a route that blends before use.
Sinter feed
- Operating condition
- Fine material blended into a sinter mix before the burden is charged.
- What shifts in the specification
- The blend ratio and the tolerance around the blended figure replace the band of any single component.
- Why routes are not interchangeable
- A sinter feed window is written on blend behaviour, not on the specification of one constituent material.
GCC markets and destination planning
The window travels; the wording that defines it may not
A stated band means the same thing at every destination. What changes is who applies it, where the acceptance is measured and which documents the consignee needs before the boundary can be settled.
United Arab EmiratesSourcing into the UAE through Jebel Ali or Khalifa Port, the acceptance window is usually written by the receiving plant rather than the trader, so state which party sets the band and confirm the entry point the consignee takes.iron ore supplier UAE
Saudi ArabiaDeliveries to Dammam or Jeddah that continue inland carry the conformity documents to an inland plant, so the acceptance window has to be agreed against that plant's schedule rather than the port's handling terms.iron ore supplier Saudi Arabia
QatarA 62% Fe consignment into Hamad Port is normally cleared against a document set agreed in advance, so the boundary of the accepted band and the sampling basis should be settled before discharge rather than at it.iron ore supplier Qatar
KuwaitShuwaikh and Shuaiba are short-sea legs, so a boundary dispute over the band is expensive to resolve once the vessel has sailed. Fix the tolerance and the verification method before loading.iron ore supplier Kuwait
BahrainBahrain consignments often connect to a mainland consumer with its own internal specification, so the acceptance window the material has to fall inside may be tighter than the one the quotation mentions.iron ore supplier Bahrain
OmanSohar and Duqm requirements frequently serve an industrial zone where the plant takes delivery directly, so the boundary is judged against that plant's receipt assay rather than a nominal band.iron ore supplier Oman These are destination planning routes. They describe the logistics and documentation inputs each destination changes, and make no claim that Noor Deira Steel holds stock, a branch, a warehouse or a port presence in any market listed.
Commercial, logistics and availability inputs
What the quotation rests on — and what stays open
A quotation is only comparable when the inputs behind it are stated. Each row below names what an input changes and what remains unknown until it is confirmed.
| Quotation input | What it changes | What stays unknown until confirmed |
|---|---|---|
| Window boundaries and inclusion | Whether an offer on the edge of your band passes or fails. | The classification of any boundary case, until the wording is fixed. |
| Iron figure and its tolerance | Whether the offer occupies a band or stands as a point against your boundary. | Whether two offers on the same figure actually occupy the same place. |
| Chemistry limits and basis | Whether the offer clears every field your window constrains, not just the iron figure. | Suitability, because an offer can pass on iron and fail on gangue. |
| Moisture value and basis | Whether the figures sit on the same basis as the one your window uses. | Comparability between the offer and the window itself. |
| Size distribution and method | Whether the material suits the receiving step as delivered. | Suitability until the distribution and the method behind it are known. |
| Quantity and cadence | Whether the requirement is a single lot or a repeating programme. | The commercial structure and the shipment planning basis. |
| Destination port and Incoterm | Which carriage legs, duties and charges sit inside the quoted figure. | The delivered cost until the place and the term are named. |
| Document set | Which evidence the lot carries and what your hold point accepts. | Whether the evidence satisfies the contract until the set is named. |
What this page does not claim
- No price, benchmark, discount or premium is published.
- No stock position or availability is claimed for any material.
- No lead time, loading rate or shipping schedule is stated.
- No mine, mill, source origin or ownership is claimed.
- No certification, lab accreditation or project approval is claimed.
- No suggested window, boundary or tolerance is offered on your behalf.
Ready to be quoted
Run the offer through the window check above and send the result with your enquiry. Everything still unresolved travels with it as an open question rather than a silent assumption.
Grade and product links
Check the neighbouring band before you substitute
Each of these is a different purchase with its own typical chemistry and its own commercial basis. Use them to test whether a neighbouring band fits your window or to step back to the product cluster — not as equivalents.
- iron ore supplier
- 58 fe iron ore supplier
- 63.5 fe iron ore supplier
- 65 fe iron ore supplier
- 66 fe iron ore concentrate supplier
Adjacent bands are candidates to be tested, not equivalents. Whether one substitutes for another is settled by your window on every field it constrains, and by the evidence behind each figure — never by the distance between two numbers.
Reading a band against a window
- A band expresses one fieldIt narrows the iron figure into a tradable range. It says nothing about gangue, sizing, moisture or the tolerance attached.
- A window constrains manyYour schedule sets how far each field may move. An offer has to clear all of them, not the band alone.
- Boundaries are contract termsWhether an edge is included decides borderline cases, and that wording belongs in the contract rather than the conversation.
- Higher is not saferA figure above the window can breach an upper bound your process set for a reason. The band is a range, not a ranking.
Expert insight
What decides a substitution enquiry?
Not the iron figure itself — both offers will quote one. What decides it is whether the figure sits inside a window you have written down, on a basis matching yours, with the evidence behind it stated well enough to be checked at receipt.
Before you treat an offer as a substitute
Work through these in order. Each is a question the offer has to answer before it can be called equivalent to what you already buy.
- 1Write the window down firstA boundary that exists only in conversation cannot classify an offer. Put the lower and upper figures, and their inclusion, into the specification before you compare anything.
- 2Fix the basis on both sidesA window written on a dry figure and an offer reported as received are not describing the same material. Convert before you compare.
- 3Ask for the tolerance, not just the figureTwo offers quoting the same number with different tolerances occupy different positions against your boundary.
- 4Match the method and the sampling basisA figure produced by a different analytical method, from a differently drawn sample, is not the same figure as the one behind your window.
- 5Check the fields beyond ironAn offer can clear your band and still breach an alumina, phosphorus or sizing limit that the same window constrains.
- 6Read the boundary wordingWhere a figure lands exactly on an edge, the contract's inclusion of that edge decides the case. Confirm it rather than assuming it.
Source record
- Primary source
- ISO 2597-1:2006 — Iron ores — Determination of total iron content — Part 1
- Direct source URL
- iso.org — ISO 2597-1:2006
- Method
- Use the ISO scope to separate a measured total-iron result from a commercial band label, and to require the analytical method and sample basis alongside any figure compared against a boundary.
- Information date
- 2026-10-09
- Scope
- Determination of total iron content in natural iron ores, concentrates and agglomerates within the method's stated range.
Limitations
- The method measures total iron only; it does not establish impurity limits, size distribution, moisture, physical strength or metallurgical performance.
- A commercial band such as 62% Fe is not a purchase specification, and its tolerance remains buyer-seller specific rather than fixed by the label.
- This page recommends no window, boundary or tolerance. Every bound used in the check above was entered by you.
Evidence-led buyer advantages
How we keep a substitution from resting on a label
Each item starts from a real difficulty on a 62% Fe substitution enquiry, states the practice that addresses it, and ends at the outcome it produces. None rests on a claim about stock, origin or price that this page cannot substantiate.
- Buyer concern
- A band treated as a specification
- What we do
- We treat the figure as one field in your window and ask for the tolerance alongside it before the offer is placed against a boundary.
- Procurement outcome
- The offer is classified on a stated band rather than on a label.
- Buyer concern
- An adjacent band assumed to substitute
- What we do
- Neighbouring bands are treated as candidates to be checked against your window, never as interchangeable specifications.
- Procurement outcome
- A substitution is accepted because it fits the window, not because the figure looks close.
- Buyer concern
- Boundary cases settled after delivery
- What we do
- Whether an edge is included is read from your contract, and the tolerance and methods are confirmed before acceptance.
- Procurement outcome
- The boundary question is answered at the enquiry rather than argued at the hold point.
- Buyer concern
- Failure on a field the window also constrains
- What we do
- Every field your window constrains is checked, since an offer can pass on iron and still breach a gangue or sizing limit.
- Procurement outcome
- Suitability is judged on the whole schedule rather than on one number.
- Buyer concern
- Figures compared across different bases
- What we do
- The basis behind the iron, moisture and sizing figures is matched to the basis your window uses before any comparison.
- Procurement outcome
- The offer is placed against a window written the same way.
- Buyer concern
- Sizing left out of the window
- What we do
- The size distribution and its determination method are requested together, because the receiving step depends on both.
- Procurement outcome
- The material suits the process it was specified for rather than being found unsuitable on arrival.
Advantages describe procurement practice. They make no claim about stocking position, mine or mill ownership, origin, delivered tonnage, pricing position or certification status.
From enquiry to delivery
Who owns what, at every stage
A substitution enquiry moves through defined stages, and the window is what each stage works against. Each stage below names the concern it resolves, who owns it, what has to be supplied, what comes out of it and the risk if it is skipped.
| Stage | Buyer concern | Owner | Required input | Evidence / output | Risk if skipped | Next action |
|---|---|---|---|---|---|---|
| Window written down | A boundary held only in conversation cannot classify an offer. | Buyer / technical sourcing | Lower and upper figures, their inclusion, and the fields constrained. | A stated acceptance window. | Boundary cases are settled by opinion after delivery. | Record the window in the specification. |
| Basis aligned | The window and the offer must be reported on the same basis. | Buyer / procurement analyst | The basis behind iron, moisture and sizing figures. | Figures on one comparable basis. | The offer is placed against a window written differently. | Convert or restate before comparing. |
| Offer classified | The offer has to be located against the boundaries. | Buyer / procurement | Offer figure, tolerance and stated basis. | Inside, outside or on a boundary. | A near-miss is accepted as if it passed. | Run the window check. |
| Boundary wording confirmed | An edge case turns on whether the edge is included. | Buyer / contracts | The contract's inclusion wording for each boundary. | A stated position for the edge case. | The classification is disputed at the hold point. | Confirm the wording in writing. |
| Evidence review | The figure that decides the boundary must be defensible. | Supplier and appointed inspection party | Analytical method, sampling basis and lot figures. | A certificate and sampling record. | The figure cannot be reproduced at receipt. | Confirm against the agreed set. |
| Commercial basis | Price and quantity must rest on one basis. | Buyer / supplier commercial | Mass basis, quantity, cadence and Incoterm. | A quotation on a stated basis. | Wet and dry quantities cannot be reconciled. | Agree the basis in writing. |
| RFQ handoff | The resolved position must reach the supplier intact. | Buyer | The complete window check record. | A transmittable RFQ summary. | Fields lost or normalised silently. | Send the summary as entered. |
Buyer FAQ
Questions that come up when an offer has to clear a band
These are the questions procurement teams raise once an offer exists near the edge of what their process accepts — not what the figure means, but what has to be pinned down before the offer is accepted or rejected.
What is a substitution window and who sets it?
It is the range of iron figures your own process can accept without a change to the burden, the flux or the product you make. It is set by your plant, your acceptance schedule and your customer's specification — never by this page. All this page does is let you state that window and compare an offer against it, so that the boundary is visible before the offer is accepted rather than after it arrives.
Is 62% Fe interchangeable with 63.5% Fe or 65% Fe?
Not by default. Grade bands are commercial conventions whose tolerances are set buyer-seller in the contract, and each band tends to carry its own impurity profile and its own commercial basis. An offer from a neighbouring band only substitutes if it falls inside your window on every field your window constrains — not just on the iron figure. Treat an adjacent band as a candidate to be checked, not as an equivalent.
An offer sits exactly on the boundary of my window. Can I accept it?
A figure exactly on the boundary falls inside a closed window but on the edge of an open one, and that difference is a contract term, not a technicality. Before treating an offer on the boundary as acceptable, confirm that the tolerance around its figure is stated, that the sampling and analytical methods match the ones your window was written against, and that your contract says plainly whether the boundary is included. Without those three, a boundary case is unresolved rather than passing.
What evidence makes a substitution defensible?
A stated assay method with its tolerance, a stated sampling and preparation basis, and the lot-specific figures for every field your window constrains — not only the iron figure. The offer should also state the moisture basis and the size determination method, because a figure produced differently from the one behind your window is not the same figure. Where any of these is missing, the substitution rests on an assumption rather than on evidence.
Does a higher Fe figure make an offer safer to accept?
No. A higher figure can arrive with a different gangue load, a different moisture profile and a different reduction behaviour, and it may sit outside your window for a reason the headline number does not show — for example by breaching an alumina or phosphorus limit your route cannot absorb. Accepting a material is about clearing every field your window states, and a higher iron figure clears exactly one of them.
Qualified RFQ
Request a quote for 62% Fe Iron Ore
Send your window, the offer figures, your gangue limits, the sizing, quantity, destination and required delivery date. Every unresolved item — a boundary not yet written down, a method not named — is listed back to you as a question. Price on request.
Free, no-obligation specification review · Price on request
Contact the commercial department
- +971 56 398 0860
- sales@noordeirasteel.ae
- Office 3303, Churchill Executive Tower, Business Bay, Dubai, United Arab Emirates
- Monday – Saturday: 8.00 AM – 6.00 PMSunday: Closed
Unresolved items travel with this RFQ. If a boundary, method or document level is still open, it is listed as a question rather than assumed on your behalf.
